软土中超深圆形竖井的变形特征:案例研究

IF 8.2 1区 工程技术 Q1 ENGINEERING, CIVIL Underground Space Pub Date : 2023-11-25 DOI:10.1016/j.undsp.2023.09.006
Yafei Qiao , Feng Xie , Zhanwei Bai , Jiafeng Lu , Wenqi Ding
{"title":"软土中超深圆形竖井的变形特征:案例研究","authors":"Yafei Qiao ,&nbsp;Feng Xie ,&nbsp;Zhanwei Bai ,&nbsp;Jiafeng Lu ,&nbsp;Wenqi Ding","doi":"10.1016/j.undsp.2023.09.006","DOIUrl":null,"url":null,"abstract":"<div><p>A circular shaft is often used to access a working well for deep underground space utilization. As the depth of underground space increases, the excavation depth of the shaft increases. In this study, the deformation characteristics of a circular shaft with a depth of 56.3 m were presented and analysed. The main monitoring contents included: (1) wall deflection; (2) vertical wall movement; (3) horizontal soil movement; (4) vertical surface movement; and (5) basal heave. Horizontally, the maximum wall deflection was only 7.7 mm. Compared with the wall deflection data collected for another 29 circular excavations, the ratio of maximum wall deflection to excavation depth of this shaft was smaller due to a smaller ratio of diameter to excavation depth. The wall deflection underwent two stages of deformation: the first stage was mainly circumferential compression caused by the mutual extrusion of joints between walls, and the second stage was typical vertical deflection deformation. The horizontal soil movement outside the shaft was greater than the wall deflection and the deep soil caused great horizontal movement because of dewatering at confined water layers. Vertically, a basal heave of 203.8 mm occurred in the pit centre near the bottom. Meanwhile, the shaft was uplifted over time and showed 3 stages of vertical movement. The surface outside the shaft exhibited settlement and uplift deformation at different locations due to different effects. The basal heave caused by excavation was the dominant factor, driving the vertical movement of the shaft as well as the surrounding surface. The correlation between the wall deflection and the surface settlement outside the shaft was weak.</p></div>","PeriodicalId":48505,"journal":{"name":"Underground Space","volume":null,"pages":null},"PeriodicalIF":8.2000,"publicationDate":"2023-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2467967423001538/pdfft?md5=27e8f96a2cee41db88e9613eec2a3aab&pid=1-s2.0-S2467967423001538-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Deformation characteristics of ultra-deep circular shaft in soft soil: A case study\",\"authors\":\"Yafei Qiao ,&nbsp;Feng Xie ,&nbsp;Zhanwei Bai ,&nbsp;Jiafeng Lu ,&nbsp;Wenqi Ding\",\"doi\":\"10.1016/j.undsp.2023.09.006\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>A circular shaft is often used to access a working well for deep underground space utilization. As the depth of underground space increases, the excavation depth of the shaft increases. In this study, the deformation characteristics of a circular shaft with a depth of 56.3 m were presented and analysed. The main monitoring contents included: (1) wall deflection; (2) vertical wall movement; (3) horizontal soil movement; (4) vertical surface movement; and (5) basal heave. Horizontally, the maximum wall deflection was only 7.7 mm. Compared with the wall deflection data collected for another 29 circular excavations, the ratio of maximum wall deflection to excavation depth of this shaft was smaller due to a smaller ratio of diameter to excavation depth. The wall deflection underwent two stages of deformation: the first stage was mainly circumferential compression caused by the mutual extrusion of joints between walls, and the second stage was typical vertical deflection deformation. The horizontal soil movement outside the shaft was greater than the wall deflection and the deep soil caused great horizontal movement because of dewatering at confined water layers. Vertically, a basal heave of 203.8 mm occurred in the pit centre near the bottom. Meanwhile, the shaft was uplifted over time and showed 3 stages of vertical movement. The surface outside the shaft exhibited settlement and uplift deformation at different locations due to different effects. The basal heave caused by excavation was the dominant factor, driving the vertical movement of the shaft as well as the surrounding surface. The correlation between the wall deflection and the surface settlement outside the shaft was weak.</p></div>\",\"PeriodicalId\":48505,\"journal\":{\"name\":\"Underground Space\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":8.2000,\"publicationDate\":\"2023-11-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2467967423001538/pdfft?md5=27e8f96a2cee41db88e9613eec2a3aab&pid=1-s2.0-S2467967423001538-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Underground Space\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2467967423001538\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, CIVIL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Underground Space","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2467967423001538","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0

摘要

圆形竖井通常用于进入工作井,以利用深层地下空间。随着地下空间深度的增加,竖井的挖掘深度也随之增加。本研究介绍并分析了一个深度为 56.3 米的圆形竖井的变形特征。主要监测内容包括(1) 井壁挠度;(2) 井壁垂直移动;(3) 土壤水平移动;(4) 地表垂直移动;以及 (5) 基底隆起。在水平方向上,墙体的最大挠度仅为 7.7 毫米。与其他 29 个圆形挖掘坑的坑壁挠度数据相比,该竖井的最大坑壁挠度与挖掘深度的比率较小,这是因为直径与挖掘深度的比率较小。井壁挠度经历了两个变形阶段:第一阶段主要是井壁之间接缝的相互挤压引起的周向压缩,第二阶段是典型的垂直挠度变形。竖井外的土体水平运动大于井壁挠度,深层土体由于承压水层的脱水而产生了巨大的水平运动。在垂直方向上,基坑中心靠近底部的位置出现了 203.8 毫米的基底隆起。同时,竖井随着时间的推移而隆起,并出现了三个阶段的垂直移动。由于受到不同影响,竖井外表面在不同位置出现了沉降和隆起变形。开挖引起的基底隆起是主要因素,推动了竖井和周围地表的垂直运动。井壁挠度与井筒外表面沉降之间的相关性很弱。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Deformation characteristics of ultra-deep circular shaft in soft soil: A case study

A circular shaft is often used to access a working well for deep underground space utilization. As the depth of underground space increases, the excavation depth of the shaft increases. In this study, the deformation characteristics of a circular shaft with a depth of 56.3 m were presented and analysed. The main monitoring contents included: (1) wall deflection; (2) vertical wall movement; (3) horizontal soil movement; (4) vertical surface movement; and (5) basal heave. Horizontally, the maximum wall deflection was only 7.7 mm. Compared with the wall deflection data collected for another 29 circular excavations, the ratio of maximum wall deflection to excavation depth of this shaft was smaller due to a smaller ratio of diameter to excavation depth. The wall deflection underwent two stages of deformation: the first stage was mainly circumferential compression caused by the mutual extrusion of joints between walls, and the second stage was typical vertical deflection deformation. The horizontal soil movement outside the shaft was greater than the wall deflection and the deep soil caused great horizontal movement because of dewatering at confined water layers. Vertically, a basal heave of 203.8 mm occurred in the pit centre near the bottom. Meanwhile, the shaft was uplifted over time and showed 3 stages of vertical movement. The surface outside the shaft exhibited settlement and uplift deformation at different locations due to different effects. The basal heave caused by excavation was the dominant factor, driving the vertical movement of the shaft as well as the surrounding surface. The correlation between the wall deflection and the surface settlement outside the shaft was weak.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Underground Space
Underground Space ENGINEERING, CIVIL-
CiteScore
10.20
自引率
14.10%
发文量
71
审稿时长
63 days
期刊介绍: Underground Space is an open access international journal without article processing charges (APC) committed to serving as a scientific forum for researchers and practitioners in the field of underground engineering. The journal welcomes manuscripts that deal with original theories, methods, technologies, and important applications throughout the life-cycle of underground projects, including planning, design, operation and maintenance, disaster prevention, and demolition. The journal is particularly interested in manuscripts related to the latest development of smart underground engineering from the perspectives of resilience, resources saving, environmental friendliness, humanity, and artificial intelligence. The manuscripts are expected to have significant innovation and potential impact in the field of underground engineering, and should have clear association with or application in underground projects.
期刊最新文献
Detecting soil mixing, grain size distribution, and clogging potential of tunnel excavation face by classification-regression algorithms using EPBM operational data Experimental study on mechanical behavior and countermeasures of mountain tunnels under strike-slip fault movement RM2D: An automated and robust laser-based framework for mobile tunnel deformation detection Lightweight defocus deblurring network for curved-tunnel line scanning using wide-angle lenses Grain-based coupled thermo-mechanical modeling for stressed heterogeneous granite under thermal shock
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1