Elevating adaptive traffic signal control in semi-autonomous traffic dynamics by using connected and automated vehicles as probes

In this work, the connected vehicle's messages are used to create an enhanced adaptive traffic signal control (ATSC) system for improved traffic flow. Few existing studies use connected and automated vehicles (CAVs) to develop traffic signal control algorithms under hybrid connected and autonomous conditions. The proposed approach focuses on a four-phase traffic intersection with both CAVs and human-driven vehicles (HVs). CAVs share real-time state information, and a model called Roads Dynamic Segmentation estimates queuing procedures and vehicle fleet numbers on dynamic road sections. This information is used in the Store and Forward Model (SFM) to predict intersection queuing length. The ATSC system, based on model predictive control (MPC), aims to minimize intersection queue length while considering traffic constraints (undersaturated, saturated, and oversaturated) and avoiding free-flow problems due to queue overflow. To reduce computational complexity, a linear-quadratic-regulator (LQR) is used. Real-world vehicle trajectories and the SUMO tool are used for experimental purposes. Results show that the proposed method reduces average delay by 38.50% and 33.42% compared to fixed timing and traditional MPC in cases of oversaturated traffic flow with 100% CAV penetration. Even with a penetration rate of only 20%, average delay decreases by 13.65% and 6.50%, respectively. This study showcases not only the potential benefits of CAV in enhancing traffic, but also enables the optimal utilization of green duration in signalized intersection control systems. This helps prevent traffic congestion and ensures the efficient and smooth movement of traffic flow.