M. Góral, T. Kubaszek, B. Kościelniak, Dorota Stawarz
{"title":"等离子喷涂参数对滑动轴承用青铜-聚酯涂层微观结构和孔隙率的影响","authors":"M. Góral, T. Kubaszek, B. Kościelniak, Dorota Stawarz","doi":"10.4028/p-fdcdp2","DOIUrl":null,"url":null,"abstract":"The plasma sprayed bronze coatings are widely used for repairing of plain bearing used in different applications. This type of coating was not deeply analyzed in state-of-art publications. In presented article we fill this gap in the case of plasma spraying process. The influence of power current (300/500/700A) and hydrogen flow (0/4/8 NLPM) on microstructure and thickness of aluminium bronze-polyester coating was investigated. The Thermico A60 plasma torch was used for thermal spray process of coating on flat carbon steel samples (grade S355). The Metco 604NS was sprayed with 20g/min powder feed rate. The obtained results showed the presence of local large pores formed by burning of polyester in plasma plume. This gap makes role of oil pockets in bearings. The obtained coatings were characterized by large deviation in thickness in range 200-350 micrometers. It might be concluded that in requires additional milling process after deposition.","PeriodicalId":21754,"journal":{"name":"Solid State Phenomena","volume":"37 48","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-02-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The Influence of Plasma Spraying Parameters on Microstructure and Porosity of Bronze-Polyester Coatings for Plain Bearings Applications\",\"authors\":\"M. Góral, T. Kubaszek, B. Kościelniak, Dorota Stawarz\",\"doi\":\"10.4028/p-fdcdp2\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The plasma sprayed bronze coatings are widely used for repairing of plain bearing used in different applications. This type of coating was not deeply analyzed in state-of-art publications. In presented article we fill this gap in the case of plasma spraying process. The influence of power current (300/500/700A) and hydrogen flow (0/4/8 NLPM) on microstructure and thickness of aluminium bronze-polyester coating was investigated. The Thermico A60 plasma torch was used for thermal spray process of coating on flat carbon steel samples (grade S355). The Metco 604NS was sprayed with 20g/min powder feed rate. The obtained results showed the presence of local large pores formed by burning of polyester in plasma plume. This gap makes role of oil pockets in bearings. The obtained coatings were characterized by large deviation in thickness in range 200-350 micrometers. It might be concluded that in requires additional milling process after deposition.\",\"PeriodicalId\":21754,\"journal\":{\"name\":\"Solid State Phenomena\",\"volume\":\"37 48\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-02-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Solid State Phenomena\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4028/p-fdcdp2\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Solid State Phenomena","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4028/p-fdcdp2","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
The Influence of Plasma Spraying Parameters on Microstructure and Porosity of Bronze-Polyester Coatings for Plain Bearings Applications
The plasma sprayed bronze coatings are widely used for repairing of plain bearing used in different applications. This type of coating was not deeply analyzed in state-of-art publications. In presented article we fill this gap in the case of plasma spraying process. The influence of power current (300/500/700A) and hydrogen flow (0/4/8 NLPM) on microstructure and thickness of aluminium bronze-polyester coating was investigated. The Thermico A60 plasma torch was used for thermal spray process of coating on flat carbon steel samples (grade S355). The Metco 604NS was sprayed with 20g/min powder feed rate. The obtained results showed the presence of local large pores formed by burning of polyester in plasma plume. This gap makes role of oil pockets in bearings. The obtained coatings were characterized by large deviation in thickness in range 200-350 micrometers. It might be concluded that in requires additional milling process after deposition.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
