研究氧化钛浓度对鸡源性羟基磷灰石的烧结性、微结构特性、机械性能、体外生物活性和细胞培养行为的影响

IF 1.8 4区 材料科学 Q2 MATERIALS SCIENCE, CERAMICS Journal of the Australian Ceramic Society Pub Date : 2024-02-20 DOI:10.1007/s41779-024-01005-x
Hasan Gökçe
{"title":"研究氧化钛浓度对鸡源性羟基磷灰石的烧结性、微结构特性、机械性能、体外生物活性和细胞培养行为的影响","authors":"Hasan Gökçe","doi":"10.1007/s41779-024-01005-x","DOIUrl":null,"url":null,"abstract":"<div><p>This study focuses on how titanium oxide (TiO<sub>2</sub>) in concentrations ranging from 0.5 to 4% by weight added the hydroxyapatite (CHA) made from chicken femur bones’, affects sinterability, microstructural, mechanical, and in vitro bioactivity properties. According to the results of the experiments, it was determined that CHA decomposed into whitlockite, alpha tricalcium phosphate (α-TCP), tetracalcium phosphate (TTCP), and calcium oxide (CaO) phases at different temperatures. Rutile and perovskite (CaTiO<sub>3</sub>) phases were also found in TiO<sub>2</sub> added CHAs in addition to these phases. With increasing sintering temperature of CHA, the diameters and the heights of the samples decreased. Density increased up to 1250 °C and decreased at 1300 °C respectively. while the partial density value showed similar behavior with density and hardness, At 1200 °C, the maximum values of fracture toughness (1.071 MPam<sup>1/2</sup>) and compressive strength (145.417 MPa) were attained; however, as sintering temperatures increased, these values shifted downward to 0.882 MPam<sup>1/2</sup> and 111.096 MPa, respectively. It has been determined that grain growth and decomposition are the underlying factors in obtaining the highest density, hardness, fracture toughness and compressive strength values for CHA at different temperatures. Among the TiO<sub>2</sub> added CHAs, the best properties are obtained for CHA-0.5TiO<sub>2</sub> sintered at 1300 °C (Density: 3.0057 g/cm3, Hardness: 3.973 GPa, Fracture toughness: 1.583 MPam<sup>1/2</sup> and Compressive strength: 170.045 MPa) and the properties of the CHA-TiO<sub>2</sub> composite decreased with increasing TiO<sub>2</sub> ratio. This is due to the fact that increasing TiO<sub>2</sub> has a detrimental impact on CHA’s sinterability behavior and causes it to become more porous and degrade more quickly. It was discovered through in vitro bioactivity and cell culture assays that the addition of TiO<sub>2</sub> had a detrimental impact on the proliferation of bone tissues.</p></div>","PeriodicalId":673,"journal":{"name":"Journal of the Australian Ceramic Society","volume":"60 2","pages":"471 - 484"},"PeriodicalIF":1.8000,"publicationDate":"2024-02-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s41779-024-01005-x.pdf","citationCount":"0","resultStr":"{\"title\":\"Investigation of the effects of titanium oxide concentration on the sinterability, microstructural characteristics, mechanical properties, in vitro bioactivity, and cell culture behavior of chicken-derived hydroxyapatite\",\"authors\":\"Hasan Gökçe\",\"doi\":\"10.1007/s41779-024-01005-x\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>This study focuses on how titanium oxide (TiO<sub>2</sub>) in concentrations ranging from 0.5 to 4% by weight added the hydroxyapatite (CHA) made from chicken femur bones’, affects sinterability, microstructural, mechanical, and in vitro bioactivity properties. According to the results of the experiments, it was determined that CHA decomposed into whitlockite, alpha tricalcium phosphate (α-TCP), tetracalcium phosphate (TTCP), and calcium oxide (CaO) phases at different temperatures. Rutile and perovskite (CaTiO<sub>3</sub>) phases were also found in TiO<sub>2</sub> added CHAs in addition to these phases. With increasing sintering temperature of CHA, the diameters and the heights of the samples decreased. Density increased up to 1250 °C and decreased at 1300 °C respectively. while the partial density value showed similar behavior with density and hardness, At 1200 °C, the maximum values of fracture toughness (1.071 MPam<sup>1/2</sup>) and compressive strength (145.417 MPa) were attained; however, as sintering temperatures increased, these values shifted downward to 0.882 MPam<sup>1/2</sup> and 111.096 MPa, respectively. It has been determined that grain growth and decomposition are the underlying factors in obtaining the highest density, hardness, fracture toughness and compressive strength values for CHA at different temperatures. Among the TiO<sub>2</sub> added CHAs, the best properties are obtained for CHA-0.5TiO<sub>2</sub> sintered at 1300 °C (Density: 3.0057 g/cm3, Hardness: 3.973 GPa, Fracture toughness: 1.583 MPam<sup>1/2</sup> and Compressive strength: 170.045 MPa) and the properties of the CHA-TiO<sub>2</sub> composite decreased with increasing TiO<sub>2</sub> ratio. This is due to the fact that increasing TiO<sub>2</sub> has a detrimental impact on CHA’s sinterability behavior and causes it to become more porous and degrade more quickly. It was discovered through in vitro bioactivity and cell culture assays that the addition of TiO<sub>2</sub> had a detrimental impact on the proliferation of bone tissues.</p></div>\",\"PeriodicalId\":673,\"journal\":{\"name\":\"Journal of the Australian Ceramic Society\",\"volume\":\"60 2\",\"pages\":\"471 - 484\"},\"PeriodicalIF\":1.8000,\"publicationDate\":\"2024-02-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s41779-024-01005-x.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of the Australian Ceramic Society\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s41779-024-01005-x\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Australian Ceramic Society","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s41779-024-01005-x","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

摘要

本研究的重点是在鸡股骨制成的羟基磷灰石(CHA)中添加浓度为 0.5% 至 4% (按重量计)的氧化钛(TiO2)对烧结性、微结构、机械和体外生物活性特性的影响。实验结果表明,CHA 在不同温度下会分解成白锁石、α-磷酸三钙(α-TCP)、磷酸四钙(TTCP)和氧化钙(CaO)等相。除了这些相之外,在添加了二氧化钛的 CHAs 中还发现了金红石相和包晶(CaTiO3)相。随着 CHA 烧结温度的升高,样品的直径和高度减小。在 1200 °C 时,断裂韧性(1.071 MPam1/2)和抗压强度(145.417 MPa)达到最大值;然而,随着烧结温度的升高,这些值分别降至 0.882 MPam1/2 和 111.096 MPa。可以确定,晶粒生长和分解是 CHA 在不同温度下获得最高密度、硬度、断裂韧性和抗压强度值的基本因素。在添加了二氧化钛的 CHA 中,在 1300 °C 下烧结的 CHA-0.5TiO2 的性能最好(密度:3.0057 g/cm3 ):密度:3.0057 g/cm3;硬度:3.973 GPa;F3.973 GPa、断裂韧性:1.583 MPam1/2 和抗压强度:170.045 MPa),而 CHA-TiO2 复合材料的性能随着 TiO2 比例的增加而降低。这是由于 TiO2 的增加会对 CHA 的烧结性产生不利影响,使其变得更多孔,降解得更快。通过体外生物活性和细胞培养试验发现,TiO2 的添加对骨组织的增殖有不利影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Investigation of the effects of titanium oxide concentration on the sinterability, microstructural characteristics, mechanical properties, in vitro bioactivity, and cell culture behavior of chicken-derived hydroxyapatite

This study focuses on how titanium oxide (TiO2) in concentrations ranging from 0.5 to 4% by weight added the hydroxyapatite (CHA) made from chicken femur bones’, affects sinterability, microstructural, mechanical, and in vitro bioactivity properties. According to the results of the experiments, it was determined that CHA decomposed into whitlockite, alpha tricalcium phosphate (α-TCP), tetracalcium phosphate (TTCP), and calcium oxide (CaO) phases at different temperatures. Rutile and perovskite (CaTiO3) phases were also found in TiO2 added CHAs in addition to these phases. With increasing sintering temperature of CHA, the diameters and the heights of the samples decreased. Density increased up to 1250 °C and decreased at 1300 °C respectively. while the partial density value showed similar behavior with density and hardness, At 1200 °C, the maximum values of fracture toughness (1.071 MPam1/2) and compressive strength (145.417 MPa) were attained; however, as sintering temperatures increased, these values shifted downward to 0.882 MPam1/2 and 111.096 MPa, respectively. It has been determined that grain growth and decomposition are the underlying factors in obtaining the highest density, hardness, fracture toughness and compressive strength values for CHA at different temperatures. Among the TiO2 added CHAs, the best properties are obtained for CHA-0.5TiO2 sintered at 1300 °C (Density: 3.0057 g/cm3, Hardness: 3.973 GPa, Fracture toughness: 1.583 MPam1/2 and Compressive strength: 170.045 MPa) and the properties of the CHA-TiO2 composite decreased with increasing TiO2 ratio. This is due to the fact that increasing TiO2 has a detrimental impact on CHA’s sinterability behavior and causes it to become more porous and degrade more quickly. It was discovered through in vitro bioactivity and cell culture assays that the addition of TiO2 had a detrimental impact on the proliferation of bone tissues.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of the Australian Ceramic Society
Journal of the Australian Ceramic Society Materials Science-Materials Chemistry
CiteScore
3.70
自引率
5.30%
发文量
123
期刊介绍: Publishes high quality research and technical papers in all areas of ceramic and related materials Spans the broad and growing fields of ceramic technology, material science and bioceramics Chronicles new advances in ceramic materials, manufacturing processes and applications Journal of the Australian Ceramic Society since 1965 Professional language editing service is available through our affiliates Nature Research Editing Service and American Journal Experts at the author''s cost and does not guarantee that the manuscript will be reviewed or accepted
期刊最新文献
Probing higher valences of uranium in nuclear materials using diffuse reflectance spectroscopy Evaluation of the in vitro cytotoxicity and drug delivery of ytterbium (III)-doped versatile bioactive glasses for cancer treatment Rapid tetracycline degradation by S-scheme Se/g-C3N4 heterostructure Modeling of calcium phosphate based on an LCD 3D printer using brushite and calcium hydroxide Assessment of antioxidant activity, thrombogenicity and MTT assay of bioceramic phosphate as a biomaterial
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1