{"title":"三维再入式助熔单元中的附加支撑元件对损伤和能量吸收特性的影响","authors":"A. C. Kaya, A. Korucu, M. Boğoçlu","doi":"10.1007/s11340-024-01055-z","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><p>Geometric parameter optimization, novel design, and mechanism modeling of auxetic materials have been widely studied. However, manipulating the topology of the 3d printed auxetic unit cells and its influence on the damage have yet to be explored.</p><h3>Objective</h3><p>This study aims to characterize the energy absorption properties and damage mechanisms of the modified auxetic unit cells.</p><h3>Methods</h3><p>In the current study, bending-dominated re-entrant auxetic unit cells (Cell0), torsion-dominated auxetic unit cells with cross elements (CellX), buckling-dominated auxetic unit cells with vertical elements (CellB), and bending-dominated auxetic unit cells with panels (CellW) have been fabricated by FDM (Fused deposition modeling). Uniaxial compression testing of the PLA (Polylactic acid) unit cells has been carried out, and a camera has observed their deformation behavior. SR- µCT (Synchrotron radiation microtomography) and an SEM (Secondary electron microscope) accomplished further damage analysis of the struts.</p><h3>Results</h3><p>Adding additional struts hinders the lateral shrinking of the re-entrant auxetics, and re-entrant auxetic unit cells with cross elements have shown higher energy absorption capacity and efficiency than others. The struts’ damage has been governed by building direction, printed material, and strut dimensions. Intra-layer and interlayer fracture of the layers and rupture in the circumferential direction of the PLA struts have been observed in the SR- µCT slices.</p><h3>Conclusions</h3><p>By additional struts, it is possible to fabricate complex auxetic structures with enhanced energy absorption properties, but their inherent characteristics dominate the damage of the struts in the auxetic unit cells.</p><h3>Graphical Abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":552,"journal":{"name":"Experimental Mechanics","volume":"64 5","pages":"639 - 653"},"PeriodicalIF":2.0000,"publicationDate":"2024-03-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11340-024-01055-z.pdf","citationCount":"0","resultStr":"{\"title\":\"Influence of Additional Strut Elements in 3D Re-Entrant Auxetic Unit Cells on the Damage and Energy Absorption Properties\",\"authors\":\"A. C. Kaya, A. Korucu, M. Boğoçlu\",\"doi\":\"10.1007/s11340-024-01055-z\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Background</h3><p>Geometric parameter optimization, novel design, and mechanism modeling of auxetic materials have been widely studied. However, manipulating the topology of the 3d printed auxetic unit cells and its influence on the damage have yet to be explored.</p><h3>Objective</h3><p>This study aims to characterize the energy absorption properties and damage mechanisms of the modified auxetic unit cells.</p><h3>Methods</h3><p>In the current study, bending-dominated re-entrant auxetic unit cells (Cell0), torsion-dominated auxetic unit cells with cross elements (CellX), buckling-dominated auxetic unit cells with vertical elements (CellB), and bending-dominated auxetic unit cells with panels (CellW) have been fabricated by FDM (Fused deposition modeling). Uniaxial compression testing of the PLA (Polylactic acid) unit cells has been carried out, and a camera has observed their deformation behavior. SR- µCT (Synchrotron radiation microtomography) and an SEM (Secondary electron microscope) accomplished further damage analysis of the struts.</p><h3>Results</h3><p>Adding additional struts hinders the lateral shrinking of the re-entrant auxetics, and re-entrant auxetic unit cells with cross elements have shown higher energy absorption capacity and efficiency than others. The struts’ damage has been governed by building direction, printed material, and strut dimensions. Intra-layer and interlayer fracture of the layers and rupture in the circumferential direction of the PLA struts have been observed in the SR- µCT slices.</p><h3>Conclusions</h3><p>By additional struts, it is possible to fabricate complex auxetic structures with enhanced energy absorption properties, but their inherent characteristics dominate the damage of the struts in the auxetic unit cells.</p><h3>Graphical Abstract</h3>\\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":552,\"journal\":{\"name\":\"Experimental Mechanics\",\"volume\":\"64 5\",\"pages\":\"639 - 653\"},\"PeriodicalIF\":2.0000,\"publicationDate\":\"2024-03-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s11340-024-01055-z.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Experimental Mechanics\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11340-024-01055-z\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, CHARACTERIZATION & TESTING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Experimental Mechanics","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11340-024-01055-z","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CHARACTERIZATION & TESTING","Score":null,"Total":0}
Influence of Additional Strut Elements in 3D Re-Entrant Auxetic Unit Cells on the Damage and Energy Absorption Properties
Background
Geometric parameter optimization, novel design, and mechanism modeling of auxetic materials have been widely studied. However, manipulating the topology of the 3d printed auxetic unit cells and its influence on the damage have yet to be explored.
Objective
This study aims to characterize the energy absorption properties and damage mechanisms of the modified auxetic unit cells.
Methods
In the current study, bending-dominated re-entrant auxetic unit cells (Cell0), torsion-dominated auxetic unit cells with cross elements (CellX), buckling-dominated auxetic unit cells with vertical elements (CellB), and bending-dominated auxetic unit cells with panels (CellW) have been fabricated by FDM (Fused deposition modeling). Uniaxial compression testing of the PLA (Polylactic acid) unit cells has been carried out, and a camera has observed their deformation behavior. SR- µCT (Synchrotron radiation microtomography) and an SEM (Secondary electron microscope) accomplished further damage analysis of the struts.
Results
Adding additional struts hinders the lateral shrinking of the re-entrant auxetics, and re-entrant auxetic unit cells with cross elements have shown higher energy absorption capacity and efficiency than others. The struts’ damage has been governed by building direction, printed material, and strut dimensions. Intra-layer and interlayer fracture of the layers and rupture in the circumferential direction of the PLA struts have been observed in the SR- µCT slices.
Conclusions
By additional struts, it is possible to fabricate complex auxetic structures with enhanced energy absorption properties, but their inherent characteristics dominate the damage of the struts in the auxetic unit cells.
期刊介绍：
Experimental Mechanics is the official journal of the Society for Experimental Mechanics that publishes papers in all areas of experimentation including its theoretical and computational analysis. The journal covers research in design and implementation of novel or improved experiments to characterize materials, structures and systems. Articles extending the frontiers of experimental mechanics at large and small scales are particularly welcome.
Coverage extends from research in solid and fluids mechanics to fields at the intersection of disciplines including physics, chemistry and biology. Development of new devices and technologies for metrology applications in a wide range of industrial sectors (e.g., manufacturing, high-performance materials, aerospace, information technology, medicine, energy and environmental technologies) is also covered.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
