THERMAL PROCESSING OF OIL FLAX BONES INTO ACTIVATED CARBON

Flax shives – waste generated during the primary processing of flax in the textile industry, make up 70% of the total mass of oil flax stalks. The results of an experimental study of the thermal processing of oil flax bonfires by the method of slow conductive pyrolysis in the temperature range of 400–650 °C are presented. An experimental bench for thermal decomposition of flax fire and activation of carbon residue by superheated water vapor is presented. The required temperature regimes of pyrogenetic decomposition were established, which are in the range of 500–600 °C. An analysis of the physicochemical properties of experimental samples of biochar obtained by pyrogenetic decomposition of flax fires has been carried out. At low temperatures of 400–430 °C, the specific gravity of carbon is in the range of 80–82%. Under temperature conditions of 500–600 °C, the specific gravity of carbon was 91–93%. At higher temperature conditions, the yield of gaseous products increases, and the ash content in the solid carbonaceous residue increases. The modes of steam activation of biochar from flax fires have been established, so to achieve the best sorption values, water vapor should be at a temperature of 900 °C. A comparative analysis of the sorption abilities of experimentally obtained activated carbon with BAU-A activated carbon is given. Based on the data obtained, it was concluded that the activated carbon from the fire of flax corresponds to the parameters of GOST 6217-74.