Depositional Model of Early-Middle Turonian Deep Water Gulneri Formation, in Selected Outcrop and Subsurface Sections in Northern Iraq

The Gulneri Formation (Early-Middle Turonian) Deep-water depositional model was constructed using detailed microfacies analysis from the northern Iraqi wells of Kirkuk (K-116) and Bai Hassan (BH-81) as well as the Dokan outcropped area. In the outcropped section, the formation consists of 2 m of thin friable marly limestone with high organic matter and thin-bedded black shale in addition to boulder and gravel-like limestone masses in the lower part. In the K-116 and BH-81 wells, the formation is 4.3 m and 9 m thick, respectively. It is composed mainly of black bituminous, pyritic calcareous shale, and shaley limestone with scattered glauconites. Petrographic studies of seventeen thin sections of the Gulneri rocks reveal that the pelagic/deep marine faunas are the dominant skeletal grain in the micritic groundmass. Three main microfacies were recognized in the studied rocks of the Gulneri Formation, namely lime mudstone, lime wackestone, and lime packstone. However, the latter is absent in the Dokan section. According to their environmental interpretation, these microfacies were grouped into two facies associations (basinal deep water and deep shelf). Based on the results of petrographic and microfacies analyses, it is concluded that the Gulneri Formation was deposited in a basinal deep marine environment with quiet and reducing conditions in the Dokan section and a basinal deep marine environment in the K-116 and BH-81 wells which changed at intervals to a shallower deep shelf setting toward the upper part with semi reducing conditions. The euxinic deep basin that formed at the beginning of the Kurdistan foreland basin's formation was quite anoxic and deeper from the northeast to the relatively shallower basin with semi-reduced conditions towards the southwest. This is how the depositional model of the Gulneri Formation in northern Iraq changed.