Quantitative Interpretation of the Petrophysical Properties of Selected Wells for the Mishrif Formation in Nasiriyah Oilfield, Southern Part of Iraq

One of the oil field's main reservoirs is the Mishrif Formation, which is found in the Nasiriyah oilfield in the southern part of Iraq (Late Cenomanian-Early Turonian). It was one of the three oil wells selected for this study. To extract various petrophysical parameters for open wells indicated by gamma ray, density, neutron, self-potential, acoustic, and resistance, a variety of well logs were analyzed. The qualitative interpretation of the logs allowed for the identification of different types of rocks, the boundaries and thicknesses of the strata, the depths of the formation, and the zones that contained water and hydrocarbons. The quantitative interpretation, which assesses the reservoir's attributes by computing its porosity, the quantity and distribution of the shales, the levels of water and oil saturation, and other elements, that are necessary to evaluate the reservoir’s units in the research wells. The features of the study wells and the used logs were reported, to make clear how these features were distributed among the sample wells. The collected petrophysical characteristics were handled and shown as charts. There are two types of units within the Mishrif Formation: reservoir-containing CR-I, MA, CR-II, and MB. In most wells, reservoir units are made up of hard, low-porous rocks that are positioned between highly porous reservoir units. For a few wells, the MA unit had low residual and mobile hydrocarbon percentages, whereas the MB unit had large percentages, while the hard rocks had significant percentages of water saturation.