Mechanical Properties and Failure Behavior of Epoxy Rubber Powder Composites Reinforced with Hollow Beads

In this paper, new epoxy resin/rubber powder/hollow beads three-phase composites were prepared by designing the incorporation of fly ash hollow beads with different mass fractions (5%, 10%, 15%, and 20%) as new reinforcing phases into epoxy resin/rubber powder two-phase composites with 5% mass fraction of carbon black rubber powder. Quasi-static compression tests were conducted at room temperature to test the compressive properties of the oxygen resin/rubber powder/hollow beads composites. Calculate the energy absorption properties and energy absorption efficiency of the composites from the compression curves. Fracture characteristics of compressed material specimens with microscopic morphology were observed by scanning electron microscopy. By systematically analyzing the effect of fly ash hollow beads content on the mechanical properties of epoxy resin/rubber powder/hollow beads three-phase composites, it was found that fly ash hollow beads as reinforcing materials can effectively improve the brittleness and yield strength of epoxy resin/rubber powder as well as the energy-absorbing properties and efficiency of the composites. The energy absorption properties of the epoxy resin/rubber powder/hollow beads composites increased and then decreased with the increase in the mass fraction of fly ash hollow beads. In the epoxy resin/rubber powder/hollow beads composites, the most significant performance was observed when the mass fraction of fly ash was 10%.