Experimental study on critical sand production pressure gradient at different production stages of high temperature and high pressure tight sandstone gas reservoir

Sand production is a common issue in sandstone gas reservoir development, severely impacting the productivity of sandstone gas wells. In order to thoroughly investigate the sand production characteristics of high-temperature and high-pressure tight sandstone gas reservoirs, this study focuses on six core samples from tight sandstone gas reservoirs(three samples with fractures), under reservoir conditions (185 MPa, 160°C), sand production experiments were conducted to thoroughly investigate the sand production patterns in sandstone reservoirs under the combined influence of different effective stresses and production pressure differentials. The results indicate: (1) under the simultaneous increase of effective pressure and production pressure differential, sand production near the wellbore (r = 0.1 m) becomes more likely in the reservoir; (2) in actual reservoirs without fractures near the wellbore (r = 0.1 m), sand production phenomena do not occur; (3) reservoirs with fractures near the wellbore (r = 0.1 m) are more prone to sand production, under an effective stress of 90 MPa, with specimens containing fractures exhibiting a 76.48% lower critical sand production pressure gradient compared to those without fractures; (4) when the pore fluid pressure is 95 MPa, the maximum gas production rate for Well X without sand production is 12.4 × 10⁴ m³/d. The experimental results have guiding significance for the rational production of gas wells in this type of reservoir.