Investigation of the magnetic and structural properties in the non‐stoichiometric Heusler alloy Ni50Mn25+xSn25‐x; x=13,14.

Memory Shape Magnetic Alloys, especially Heusler alloys, are important materials in replacing conventional cooling with magnetic systems. In the present study off stoichiometric Heusler alloys with nominal composition Χ50Υ25+xΖ25‐x (X = Ni; Y = Mn; Z = Sn; x = 13,14) were prepared by arc melting followed by thermal treatment. Structural properties were analyzed with X‐ray diffraction at room temperature (RT) and at elevated temperatures, above the martensite – austenite transition area, in order to determine the relevant crystallographic parameters and observe the transition. Martensite stabilization at RT appears to be a challenge, coexistence of martensite – austenite phases was observed and calculated for both 38‐12 and 39‐11 (16% and 12% austenite respectively). Magnetization measurements versus temperature and field were recorded in the areas of interest where 1st order transitions were expected (355 K for x=13 and 408 K for x=14), and the magnetic entropy's changes (ΔSm) were determined (0.4 (J/kgK) for x=13 and 0.3 J/(kgK) for x=14; Hmax=1T). The complex character of the magnetic properties and their dependence on Mn‐Sn ratio and on the distance between Mn atoms is discussed. The structure and the lattice parameters were determined using an anisotropic strain broadening model; stress and strain were detected in the structure due to crystal phase coexistence.This article is protected by copyright. All rights reserved.