Raman Spectroscopy for the characterization of the macromolecular structure of Highveld coals (South Africa)

Industrial applications of coal rely on understanding its macromolecular structure, which is primarily controlled by coal type and rank. The present study assessed five (5) samples from different collieries extracting coal from the No. 4 Seam of the Highveld Coalfield and their float products, produced at relative densities (RD) of 1.7 and 1.9 g/cm³. The aim was to assess changes in maceral composition and coal quality following the density fractionation, and to use Raman Spectroscopy to compare differences in macromolecular structures between the parent samples and the float products. Raman parameters were also determined for specific macerals, i.e., semifusinite and collotelinite. Mean random vitrinite reflectance (%RoV) values for the studied coals range between 0.57 and 0.60% (medium rank D/C bituminous) and the parent coals are inertinite-rich (70.3 to 88.7 vol% mmf), enriched in semifusinite and inertodetrinite. Following density fractionation, reactive macerals (a combination of liptinite, vitrinite, and reactive semifusinite) are enriched in the float products (designated by “F”), specifically in the products obtained at the 1.7 RD. In comparison, the proportion of inert macerals is higher in the F1.9 samples. These differences in maceral composition are reflected in the Raman spectra and parameters. Although the G and D1 bands for the parent coals and F1.9 samples are similar, these bands are narrower than for the F1.7 samples, indicative of greater aromaticity. The G FWHM values for the F1.9 samples are comparable to those for the parent coal samples, and lower than for the F1.7 samples. This reflects larger differences in maceral composition between the parent coals and the F1.7 samples. In contrast, the D1 FWHM values for the float products, particularly the F1.7 samples, are slightly higher than the parent coals, reflecting a disordered aromatic character mainly related to the presence of aliphatic chains. The Raman spectra for the F1.7 samples are more like that for collotelinite. In contrast, the Raman spectra and parameters (G and D1 FWHM) for the F1.9 samples are more comparable to semifusinite. Thus, the increased aliphaticity for the F1.7 samples is attributed to the relative enrichment of reactive macerals, whereas higher aromaticity for the F1.9 samples reflects a larger proportion of inert macerals. Raman spectroscopy expanded on the petrographic data by interrogating the macromolecular structure of the isorank Highveld coals and their float products. This may assist in predicting the behaviour of the coals during industrial applications (i.e., liquefaction, gasification, combustion, and carbon fibre production).