Pooja Dwivedi, Sachin Maheshwari, Arshad Noor Siddiquee
{"title":"摩擦搅拌工艺制造的 SiC + Fe + Mn + Sn 混合增强表面复合材料的微观结构和力学性能：双程工艺的影响","authors":"Pooja Dwivedi, Sachin Maheshwari, Arshad Noor Siddiquee","doi":"10.1007/s12540-024-01697-7","DOIUrl":null,"url":null,"abstract":"<div><p>The primary objective of this research work is to analyse the effect of double pass on grain refinement during friction stir processing (FSP). The impact of double pass was also assessed on the microstructure, micro-hardness, and tensile strength of the hybrid reinforced aluminum alloy. Field emission scanning microscopy with energy dispersive spectroscopic analysis was used to analyze the grain size distribution as well as the percentage of elements present across the stir zone (SZ) and mode of fracture during the tensile testing. Results show a notable increase in mechanical properties and a huge reduction in grain size when compared to base material (BM). The grain size of SZ in single pass FSP (FSPed-SP) and double pass FSP (FSPed-DP) was reduced to 76.71% and 91.8% in comparison to the BM because repetitive stirring action causes huge dynamic recrystallization. However, peak micro-hardness in FSPed-DP and FSPed-SP was achieved as 30.58% and 22.79% of the BM due to the hall–petch effect. FSPed-DP demonstrated superior ultimate tensile strength and percentage of elongation in contrast to FSPed-SP, which exhibited values of 29.03% and 25% respectively.</p><h3>Graphical Abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":703,"journal":{"name":"Metals and Materials International","volume":"30 11","pages":"3172 - 3183"},"PeriodicalIF":3.3000,"publicationDate":"2024-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Microstructure and Mechanical Properties of SiC + Fe + Mn + Sn Hybrid Reinforced Surface Composites Fabricated by Friction Stir Processing: Effect of Double Pass\",\"authors\":\"Pooja Dwivedi, Sachin Maheshwari, Arshad Noor Siddiquee\",\"doi\":\"10.1007/s12540-024-01697-7\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The primary objective of this research work is to analyse the effect of double pass on grain refinement during friction stir processing (FSP). The impact of double pass was also assessed on the microstructure, micro-hardness, and tensile strength of the hybrid reinforced aluminum alloy. Field emission scanning microscopy with energy dispersive spectroscopic analysis was used to analyze the grain size distribution as well as the percentage of elements present across the stir zone (SZ) and mode of fracture during the tensile testing. Results show a notable increase in mechanical properties and a huge reduction in grain size when compared to base material (BM). The grain size of SZ in single pass FSP (FSPed-SP) and double pass FSP (FSPed-DP) was reduced to 76.71% and 91.8% in comparison to the BM because repetitive stirring action causes huge dynamic recrystallization. However, peak micro-hardness in FSPed-DP and FSPed-SP was achieved as 30.58% and 22.79% of the BM due to the hall–petch effect. FSPed-DP demonstrated superior ultimate tensile strength and percentage of elongation in contrast to FSPed-SP, which exhibited values of 29.03% and 25% respectively.</p><h3>Graphical Abstract</h3>\\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":703,\"journal\":{\"name\":\"Metals and Materials International\",\"volume\":\"30 11\",\"pages\":\"3172 - 3183\"},\"PeriodicalIF\":3.3000,\"publicationDate\":\"2024-05-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metals and Materials International\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s12540-024-01697-7\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metals and Materials International","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s12540-024-01697-7","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Microstructure and Mechanical Properties of SiC + Fe + Mn + Sn Hybrid Reinforced Surface Composites Fabricated by Friction Stir Processing: Effect of Double Pass
The primary objective of this research work is to analyse the effect of double pass on grain refinement during friction stir processing (FSP). The impact of double pass was also assessed on the microstructure, micro-hardness, and tensile strength of the hybrid reinforced aluminum alloy. Field emission scanning microscopy with energy dispersive spectroscopic analysis was used to analyze the grain size distribution as well as the percentage of elements present across the stir zone (SZ) and mode of fracture during the tensile testing. Results show a notable increase in mechanical properties and a huge reduction in grain size when compared to base material (BM). The grain size of SZ in single pass FSP (FSPed-SP) and double pass FSP (FSPed-DP) was reduced to 76.71% and 91.8% in comparison to the BM because repetitive stirring action causes huge dynamic recrystallization. However, peak micro-hardness in FSPed-DP and FSPed-SP was achieved as 30.58% and 22.79% of the BM due to the hall–petch effect. FSPed-DP demonstrated superior ultimate tensile strength and percentage of elongation in contrast to FSPed-SP, which exhibited values of 29.03% and 25% respectively.
期刊介绍：
Metals and Materials International publishes original papers and occasional critical reviews on all aspects of research and technology in materials engineering: physical metallurgy, materials science, and processing of metals and other materials. Emphasis is placed on those aspects of the science of materials that are concerned with the relationships among the processing, structure and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical) of materials. Aspects of processing include the melting, casting, and fabrication with the thermodynamics, kinetics and modeling.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
