Kateryna Smirnova;Mark van der Heijden;Domine Leenaerts;Ahmet Çağrı Ulusoy
{"title":"W 波段双向 6 位有源移相器","authors":"Kateryna Smirnova;Mark van der Heijden;Domine Leenaerts;Ahmet Çağrı Ulusoy","doi":"10.1109/LSSC.2024.3398779","DOIUrl":null,"url":null,"abstract":"In this letter, a novel W-band switchless bidirectional active phase shifter with 6-bit resolution is proposed. The circuit is implemented in the SiGe:C BiCMOS technology using a Gilbert-cell core configured in a way to combine the reciprocity of passive phase shifters with the compactness of active topologies. The circuit exhibits a maximum average gain of –7.4 and –8.2 dB in two directions while maintaining the RMS amplitude and phase error lower than 0.84 dB and 3.4° within 85– 100 GHz, respectively. The phase shifter uses 0.04 mm2 of the IC area and the DC power of 38 mW in each direction from a 2.4-V supply voltage, excluding the phase control circuitry.","PeriodicalId":13032,"journal":{"name":"IEEE Solid-State Circuits Letters","volume":"7 ","pages":"175-178"},"PeriodicalIF":2.2000,"publicationDate":"2024-03-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Bidirectional 6-Bit Active Phase Shifter in W-Band\",\"authors\":\"Kateryna Smirnova;Mark van der Heijden;Domine Leenaerts;Ahmet Çağrı Ulusoy\",\"doi\":\"10.1109/LSSC.2024.3398779\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this letter, a novel W-band switchless bidirectional active phase shifter with 6-bit resolution is proposed. The circuit is implemented in the SiGe:C BiCMOS technology using a Gilbert-cell core configured in a way to combine the reciprocity of passive phase shifters with the compactness of active topologies. The circuit exhibits a maximum average gain of –7.4 and –8.2 dB in two directions while maintaining the RMS amplitude and phase error lower than 0.84 dB and 3.4° within 85– 100 GHz, respectively. The phase shifter uses 0.04 mm2 of the IC area and the DC power of 38 mW in each direction from a 2.4-V supply voltage, excluding the phase control circuitry.\",\"PeriodicalId\":13032,\"journal\":{\"name\":\"IEEE Solid-State Circuits Letters\",\"volume\":\"7 \",\"pages\":\"175-178\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-03-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE Solid-State Circuits Letters\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://ieeexplore.ieee.org/document/10527352/\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"COMPUTER SCIENCE, HARDWARE & ARCHITECTURE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Solid-State Circuits Letters","FirstCategoryId":"1085","ListUrlMain":"https://ieeexplore.ieee.org/document/10527352/","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"COMPUTER SCIENCE, HARDWARE & ARCHITECTURE","Score":null,"Total":0}
引用次数: 0
摘要
本文提出了一种分辨率为 6 位的新型 W 波段无开关双向有源移相器。该电路采用 SiGe:C BiCMOS 技术实现,使用 Gilbert-cell 内核,其配置方式结合了无源移相器的互易性和有源拓扑结构的紧凑性。该电路在两个方向上的最大平均增益分别为 -7.4 和 -8.2 dB,同时在 85-100 GHz 范围内保持有效值振幅和相位误差分别低于 0.84 dB 和 3.4°。该移相器的集成电路面积为 0.04 mm2,在 2.4 V 电源电压下,每个方向的直流功率为 38 mW(不包括相位控制电路)。
Bidirectional 6-Bit Active Phase Shifter in W-Band
In this letter, a novel W-band switchless bidirectional active phase shifter with 6-bit resolution is proposed. The circuit is implemented in the SiGe:C BiCMOS technology using a Gilbert-cell core configured in a way to combine the reciprocity of passive phase shifters with the compactness of active topologies. The circuit exhibits a maximum average gain of –7.4 and –8.2 dB in two directions while maintaining the RMS amplitude and phase error lower than 0.84 dB and 3.4° within 85– 100 GHz, respectively. The phase shifter uses 0.04 mm2 of the IC area and the DC power of 38 mW in each direction from a 2.4-V supply voltage, excluding the phase control circuitry.