Field monitoring and modelling of sediment transport, hydraulics and hydroabrasion at Sediment Bypass Tunnels

Sediment Bypass Tunnels (SBTs) are proven to be an effective measure to reduce or even stop reservoir sedimentation by bypassing sediment laden flows around reservoir dams to the downstream river reach. They are mostly used in Switzerland, Japan, and Taiwan. However, hydraulic and sedimentological operating conditions and the resistance of the invert materials against hydroabrasive erosion affect their cost-effectiveness. Hydroabrasion is a pressing issue at SBTs, other hydraulic structures and steep bedrock rivers exposed to high sediment transport rates under supercritical flow conditions. The present study was therefore conducted to address this issue by aiming at improving knowledge on abrasion mechanics and calibrating a mechanistic saltation abrasion model enhanced by Demiral-Yüzügüllü (2021). To this end, the abrasion resistance of fourteen different invert materials installed at Solis, Pfaffensprung and Runcahez SBTs in Switzerland was quantified by annual 3D laser scanning and the hydraulic conditions and sediment transport rates were regularly monitored between 2017 and 2021. The analysis of invert scans and hydraulic conditions revealed that Prandtl’s first and second kinds of secondary currents occurring in the bends and straight sections of the SBTs, respectively, and the observed abrasion patterns were strongly interrelated. The tested potassium aluminate cement and steel fibre concretes, granite, cast basalt and steel plates had better abrasion resistance against impact of sediment-laden flows compared to other materials. Sediment mineralogical composition i.e., bulk hardness relative to the invert material properties significantly affected hydroabrasion. The enhanced abrasion prediction model was calibrated with the present data and a quasi-constant abrasion coefficient of k_v = (4.8 ± 2.2) × 10⁴ was obtained. The enhanced model is well-suited for both laboratory and field scales. The present findings will contribute to the sustainable utilization and operational safety of hydraulic structures, optimization of SBT and reservoir operations regarding bypassing efficiency and reservoir lifetime and modelling of bedrock river erosion.