Xianglong Dong , Ziji Ma , Zhiwen Jiang , Qi Wang , Feilong Wang
{"title":"偏置磁场对岩石螺栓电磁超声无损检测中换能器效率的影响","authors":"Xianglong Dong , Ziji Ma , Zhiwen Jiang , Qi Wang , Feilong Wang","doi":"10.1016/j.sna.2024.115532","DOIUrl":null,"url":null,"abstract":"<div><p>Non-destructive testing (NDT) of rock bolt anchoring quality is an important part of engineering quality and safety control, electromagnetic ultrasonic NDT is one of the promising detection methods, and improving the efficiency of ultrasonic transducer by optimizing the bias magnetic field is an important factor to obtain effective information. In this paper, several factors affecting the bias magnetic field are studied, and the work is divided into simulation and demonstration: COMSOL was used to simulate the electromagnetic ultrasonic transducer(EMAT) in order to analyze the influence of the number of magnetic circuit, the thickness of magnet and the thickness of yoke iron on the bias magnetic field. Then, an experimental platform was built, the magnetic circuit structure of the transducer was set with reference to the simulation results, and several important parameters of the bias magnetic field were determined by analyzing the collected signals. The results show that with the increase of the bias magnetic field magnetic circuit structure from independent to ring form, the magnetic field strength of the rock bolt increases, the magnetic field uniformity becomes better, and the efficiency of the transducer is also improved accordingly. In addition, under the same magnetic circuit condition, increasing the thickness of permanent magnet and yoke iron does not increase the magnetic flux density of the rock bolt axis proportionally, and has a limited effect on the efficiency of the transducer. In practical application, the corresponding structure is selected according to the needs, and the better bias magnetic field structure is selected while meeting the efficiency of the transducer.</p></div>","PeriodicalId":21689,"journal":{"name":"Sensors and Actuators A-physical","volume":null,"pages":null},"PeriodicalIF":4.1000,"publicationDate":"2024-06-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of bias magnetic field on transducer efficiency in electromagnetic ultrasonic non-destructive testing of Rock bolt\",\"authors\":\"Xianglong Dong , Ziji Ma , Zhiwen Jiang , Qi Wang , Feilong Wang\",\"doi\":\"10.1016/j.sna.2024.115532\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Non-destructive testing (NDT) of rock bolt anchoring quality is an important part of engineering quality and safety control, electromagnetic ultrasonic NDT is one of the promising detection methods, and improving the efficiency of ultrasonic transducer by optimizing the bias magnetic field is an important factor to obtain effective information. In this paper, several factors affecting the bias magnetic field are studied, and the work is divided into simulation and demonstration: COMSOL was used to simulate the electromagnetic ultrasonic transducer(EMAT) in order to analyze the influence of the number of magnetic circuit, the thickness of magnet and the thickness of yoke iron on the bias magnetic field. Then, an experimental platform was built, the magnetic circuit structure of the transducer was set with reference to the simulation results, and several important parameters of the bias magnetic field were determined by analyzing the collected signals. The results show that with the increase of the bias magnetic field magnetic circuit structure from independent to ring form, the magnetic field strength of the rock bolt increases, the magnetic field uniformity becomes better, and the efficiency of the transducer is also improved accordingly. In addition, under the same magnetic circuit condition, increasing the thickness of permanent magnet and yoke iron does not increase the magnetic flux density of the rock bolt axis proportionally, and has a limited effect on the efficiency of the transducer. In practical application, the corresponding structure is selected according to the needs, and the better bias magnetic field structure is selected while meeting the efficiency of the transducer.</p></div>\",\"PeriodicalId\":21689,\"journal\":{\"name\":\"Sensors and Actuators A-physical\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.1000,\"publicationDate\":\"2024-06-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Sensors and Actuators A-physical\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0924424724005260\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sensors and Actuators A-physical","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0924424724005260","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Effect of bias magnetic field on transducer efficiency in electromagnetic ultrasonic non-destructive testing of Rock bolt
Non-destructive testing (NDT) of rock bolt anchoring quality is an important part of engineering quality and safety control, electromagnetic ultrasonic NDT is one of the promising detection methods, and improving the efficiency of ultrasonic transducer by optimizing the bias magnetic field is an important factor to obtain effective information. In this paper, several factors affecting the bias magnetic field are studied, and the work is divided into simulation and demonstration: COMSOL was used to simulate the electromagnetic ultrasonic transducer(EMAT) in order to analyze the influence of the number of magnetic circuit, the thickness of magnet and the thickness of yoke iron on the bias magnetic field. Then, an experimental platform was built, the magnetic circuit structure of the transducer was set with reference to the simulation results, and several important parameters of the bias magnetic field were determined by analyzing the collected signals. The results show that with the increase of the bias magnetic field magnetic circuit structure from independent to ring form, the magnetic field strength of the rock bolt increases, the magnetic field uniformity becomes better, and the efficiency of the transducer is also improved accordingly. In addition, under the same magnetic circuit condition, increasing the thickness of permanent magnet and yoke iron does not increase the magnetic flux density of the rock bolt axis proportionally, and has a limited effect on the efficiency of the transducer. In practical application, the corresponding structure is selected according to the needs, and the better bias magnetic field structure is selected while meeting the efficiency of the transducer.
期刊介绍:
Sensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas:
• Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results.
• Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon.
• Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays.
• Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers.
Etc...