M. Moazzami , A. Akhavan-Safar , M.R. Ayatollahi , Johannes.A. Poulis , L.F.M. da Silva , S. Teixeira De Freitas
{"title":"循环老化频率对粘合剂材料老化和机械性能的影响:实验分析和数值研究","authors":"M. Moazzami , A. Akhavan-Safar , M.R. Ayatollahi , Johannes.A. Poulis , L.F.M. da Silva , S. Teixeira De Freitas","doi":"10.1016/j.marstruc.2024.103662","DOIUrl":null,"url":null,"abstract":"<div><p>In marine structures adhesive joint structures are often exposed to cyclic conditioning where the ambient humidity changes cyclically during their service. Though some comprehensive studies on the aging of adhesives exist, these researches mainly focus on monotonic aging conditions where the adhesive joints are exposed to a wet condition continuously for a long time. However, the few investigations performed on the cyclic moisture absorption of adhesive materials show that the parameters obtained in monotonic aging conditions are not suitable for estimation of the aging behaviour of adhesive exposed to alternating humidity. An important question that can arise is whether or not this frequency affects the mechanical behaviour of adhesive joints under cyclic aging condition. In this investigation bulk dogbone and square samples were manufactured, subjected to cyclic aging conditions with four different aging frequencies and tested. The results show that the moisture diffusion constant of adhesives exposed to higher aging frequencies increase more than those exposed to lower aging frequency conditions. In addition, the moisture content only affects the degradation of strength and stiffness of the tested adhesives in different aging frequencies.</p></div>","PeriodicalId":49879,"journal":{"name":"Marine Structures","volume":"98 ","pages":"Article 103662"},"PeriodicalIF":4.0000,"publicationDate":"2024-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of cyclic ageing frequencies on the ageing and mechanical behaviour of adhesive materials: Experimental analysis and numerical study\",\"authors\":\"M. Moazzami , A. Akhavan-Safar , M.R. Ayatollahi , Johannes.A. Poulis , L.F.M. da Silva , S. Teixeira De Freitas\",\"doi\":\"10.1016/j.marstruc.2024.103662\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In marine structures adhesive joint structures are often exposed to cyclic conditioning where the ambient humidity changes cyclically during their service. Though some comprehensive studies on the aging of adhesives exist, these researches mainly focus on monotonic aging conditions where the adhesive joints are exposed to a wet condition continuously for a long time. However, the few investigations performed on the cyclic moisture absorption of adhesive materials show that the parameters obtained in monotonic aging conditions are not suitable for estimation of the aging behaviour of adhesive exposed to alternating humidity. An important question that can arise is whether or not this frequency affects the mechanical behaviour of adhesive joints under cyclic aging condition. In this investigation bulk dogbone and square samples were manufactured, subjected to cyclic aging conditions with four different aging frequencies and tested. The results show that the moisture diffusion constant of adhesives exposed to higher aging frequencies increase more than those exposed to lower aging frequency conditions. In addition, the moisture content only affects the degradation of strength and stiffness of the tested adhesives in different aging frequencies.</p></div>\",\"PeriodicalId\":49879,\"journal\":{\"name\":\"Marine Structures\",\"volume\":\"98 \",\"pages\":\"Article 103662\"},\"PeriodicalIF\":4.0000,\"publicationDate\":\"2024-07-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Marine Structures\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S095183392400090X\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, CIVIL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Marine Structures","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S095183392400090X","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
Effects of cyclic ageing frequencies on the ageing and mechanical behaviour of adhesive materials: Experimental analysis and numerical study
In marine structures adhesive joint structures are often exposed to cyclic conditioning where the ambient humidity changes cyclically during their service. Though some comprehensive studies on the aging of adhesives exist, these researches mainly focus on monotonic aging conditions where the adhesive joints are exposed to a wet condition continuously for a long time. However, the few investigations performed on the cyclic moisture absorption of adhesive materials show that the parameters obtained in monotonic aging conditions are not suitable for estimation of the aging behaviour of adhesive exposed to alternating humidity. An important question that can arise is whether or not this frequency affects the mechanical behaviour of adhesive joints under cyclic aging condition. In this investigation bulk dogbone and square samples were manufactured, subjected to cyclic aging conditions with four different aging frequencies and tested. The results show that the moisture diffusion constant of adhesives exposed to higher aging frequencies increase more than those exposed to lower aging frequency conditions. In addition, the moisture content only affects the degradation of strength and stiffness of the tested adhesives in different aging frequencies.
期刊介绍:
This journal aims to provide a medium for presentation and discussion of the latest developments in research, design, fabrication and in-service experience relating to marine structures, i.e., all structures of steel, concrete, light alloy or composite construction having an interface with the sea, including ships, fixed and mobile offshore platforms, submarine and submersibles, pipelines, subsea systems for shallow and deep ocean operations and coastal structures such as piers.