Effect of Forced Convection on the Combustion Chemistry of PMMA Spheres in Microgravity

The influence of the forced convection rate on the chemical structure of a polymethyl methacrylate (PMMA) flame in an oxidizer flow under microgravity conditions was studied using numerical modeling. Gas flow around a solid sphere was simulated using the full Navier–Stokes equations for a multicomponent mixture. A multistep chemical kinetic mechanism was considered in the gas phase. The heat transfer and radiation in both the condensed and gas phases were considered in the modeling. On the PMMA surface, the pyrolysis reaction leading to the transformation of fuel from the condensed phase to the gas phase is specified. The forced convection speed varied in the range from 3 to 20 cm/s. Analysis of CO₂ concentration fields near the burning surface under microgravity conditions showed that the maximum CO₂ concentration is observed in the downstream zone. The width of the flame zone and its chemical structure depend on the intensity of forced convection. The width of the flame against the flow decreases, and the maximum CO concentration increases as the forced convection rate increases. Analysis of the rates of fuel consumption reactions showed that at a low convection speed (v_st=3 cm/s), the reaction with the H radical, which has the highest diffusion coefficient, plays a crucial role in MMA oxidation.