Simulation and verification of cylinder head’s temperature field for marine low-speed engine

The high load capacity of marine low-speed engines poses a challenge to the thermal load of the cylinder head and temperature field simulation can guide its structural design and optimization. The 3-dimensional models of the fluid domain for the cooling water and the solid domain for the cylinder head are established and meshed, the fluid domain model is simulated to research the heat transfer pattern by Fluent software, and the surface temperature and heat transfer coefficient of the cooling water is calculated. The thermal boundary conditions of the gas in the cylinder are simulated through the analysis of the engine working process. The temperature of the cylinder head is calculated based on the fluid-structure interaction model with the thermal boundary conditions by Workbench software. The validation of the model is carried out by comparing the simulated and measured temperature data in the heated inner wall of the cylinder head. The research results show that compared with the measured value, the error of simulation results is small, which shows that the model and method are reasonable. The temperature in the inner wall of the combustion chamber is low, which can provide possibilities to appropriately improve the power density of the low-speed engine and reduce the risk of low-temperature corrosion.