Process Model for SiC Oxidation for a Large Range of Conditions

A comprehensive process model for 4H‐SiC oxidation is created and calibrated against a very large collection of experimental data. The model reproduces measured oxide thickness for Si‐face, C‐face, and a‐face SiC wafers, in the temperature range 950–1500 °C, in the pressure range 0.25–4.0 atm, in the thickness range 3–1600 nm, and for SiC doping ranging between 1019 cm−3 n‐type and 1019 cm−3 p‐type. The model is based on the Massoud model: Oxidation is driven by oxidants (O2, H2O) which are present in the gas phase, diffuse through the oxide, and form SiO2 at the oxide–SiC interface. For thin oxides, the interface reaction rate includes empirical correction terms which add to the oxidation rate, and which asymptotically approach zero with increasing oxide thickness. For dry oxidation, a remarkable dependence on the O2 partial pressure is discovered: For thick oxides, the oxidation rate scales linearly with the pressure, but the correction term for thin oxides scales with the square root of the pressure. This suggests that the atomistic processes responsible for the fast initial growth of oxides involve the splitting of O2 molecules into two O atoms.