{"title":"烧结温度对利用粉煤灰和天然粘土制造的木质素回收陶瓷膜的影响","authors":"","doi":"10.1016/j.cherd.2024.07.060","DOIUrl":null,"url":null,"abstract":"<div><p>This study explores the utilization of coal fly ash combined with natural clay as a precursor for creating ceramic membranes through the uniaxial compaction method, aiming at lignin separation. These membranes were sintered at varying temperatures from 600 to 1000 °C. Thermal Gravimetric Analysis (TGA) revealed the robust thermal stability of the membranes. Fourier Transform Infrared (FTIR) analysis affirmed the presence of silica and alumina within the membranes. X-ray Diffraction (XRD) peaks indicated the crystalline structure and the presence of metal oxides originating from the fly ash and clay components. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) images illustrated the porous nature and rough surface of the ceramic membranes. The average pore radius of the fabricated membrane expanded from 43.12 to 7.91 nm with increasing temperature. Concurrently, membrane flux decreased from 4.13 to 0.96 ×10<sup>−6</sup> m<sup>3</sup>/m<sup>2</sup> s with higher temperatures. Lower contact angles indicated the hydrophilic properties of membranes. All membranes exhibited superior corrosion resistance and negative zeta potential, owing to the significant silica content in the fly ash. Lignin separation efficiency increased from 65 % to 81 % with increasing temperatures. The optimal sintering temperature was determined to be 800 °C, achieving a lignin recovery greater than 76 % and a membrane permeability of about 7×10<sup>−9</sup> m<sup>3</sup>/m<sup>2</sup> s kPa. Thus, the fly ash-clay-based ultrafiltration membranes synthesized in this study offer the potential for lignin biomass recovery from biorefinery effluent.</p></div>","PeriodicalId":10019,"journal":{"name":"Chemical Engineering Research & Design","volume":null,"pages":null},"PeriodicalIF":3.7000,"publicationDate":"2024-08-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of sintering temperature on ceramic membrane fabricated using coal flyash and natural clay for lignin recovery\",\"authors\":\"\",\"doi\":\"10.1016/j.cherd.2024.07.060\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>This study explores the utilization of coal fly ash combined with natural clay as a precursor for creating ceramic membranes through the uniaxial compaction method, aiming at lignin separation. These membranes were sintered at varying temperatures from 600 to 1000 °C. Thermal Gravimetric Analysis (TGA) revealed the robust thermal stability of the membranes. Fourier Transform Infrared (FTIR) analysis affirmed the presence of silica and alumina within the membranes. X-ray Diffraction (XRD) peaks indicated the crystalline structure and the presence of metal oxides originating from the fly ash and clay components. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) images illustrated the porous nature and rough surface of the ceramic membranes. The average pore radius of the fabricated membrane expanded from 43.12 to 7.91 nm with increasing temperature. Concurrently, membrane flux decreased from 4.13 to 0.96 ×10<sup>−6</sup> m<sup>3</sup>/m<sup>2</sup> s with higher temperatures. Lower contact angles indicated the hydrophilic properties of membranes. All membranes exhibited superior corrosion resistance and negative zeta potential, owing to the significant silica content in the fly ash. Lignin separation efficiency increased from 65 % to 81 % with increasing temperatures. The optimal sintering temperature was determined to be 800 °C, achieving a lignin recovery greater than 76 % and a membrane permeability of about 7×10<sup>−9</sup> m<sup>3</sup>/m<sup>2</sup> s kPa. Thus, the fly ash-clay-based ultrafiltration membranes synthesized in this study offer the potential for lignin biomass recovery from biorefinery effluent.</p></div>\",\"PeriodicalId\":10019,\"journal\":{\"name\":\"Chemical Engineering Research & Design\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.7000,\"publicationDate\":\"2024-08-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Chemical Engineering Research & Design\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0263876224004520\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Chemical Engineering Research & Design","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0263876224004520","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Effect of sintering temperature on ceramic membrane fabricated using coal flyash and natural clay for lignin recovery
This study explores the utilization of coal fly ash combined with natural clay as a precursor for creating ceramic membranes through the uniaxial compaction method, aiming at lignin separation. These membranes were sintered at varying temperatures from 600 to 1000 °C. Thermal Gravimetric Analysis (TGA) revealed the robust thermal stability of the membranes. Fourier Transform Infrared (FTIR) analysis affirmed the presence of silica and alumina within the membranes. X-ray Diffraction (XRD) peaks indicated the crystalline structure and the presence of metal oxides originating from the fly ash and clay components. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) images illustrated the porous nature and rough surface of the ceramic membranes. The average pore radius of the fabricated membrane expanded from 43.12 to 7.91 nm with increasing temperature. Concurrently, membrane flux decreased from 4.13 to 0.96 ×10−6 m3/m2 s with higher temperatures. Lower contact angles indicated the hydrophilic properties of membranes. All membranes exhibited superior corrosion resistance and negative zeta potential, owing to the significant silica content in the fly ash. Lignin separation efficiency increased from 65 % to 81 % with increasing temperatures. The optimal sintering temperature was determined to be 800 °C, achieving a lignin recovery greater than 76 % and a membrane permeability of about 7×10−9 m3/m2 s kPa. Thus, the fly ash-clay-based ultrafiltration membranes synthesized in this study offer the potential for lignin biomass recovery from biorefinery effluent.
期刊介绍:
ChERD aims to be the principal international journal for publication of high quality, original papers in chemical engineering.
Papers showing how research results can be used in chemical engineering design, and accounts of experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research, are particularly welcome. Contributions that deal with new developments in plant or processes and that can be given quantitative expression are encouraged. The journal is especially interested in papers that extend the boundaries of traditional chemical engineering.