Design and optimization of hexagonal tungsten ring metasurface perfect absorbers with circuit model

In this paper, a perfect absorber (PA) based on tungsten is proposed to include hexagonal‐shaped metasurface absorbers with varying hole sizes ranging from quadrangular to circular, allowing them to cover a wide wavelength spectrum. The study investigates the effects of various parameters, including the number of sides of the inner hole, on the absorber's performance and identifies the most suitable absorber by introducing an equivalent circuit. The outcomes of full‐wave numerical simulations primarily based on the finite element method (FEM) highly correspond to the final results of the circuit model. Additionally, the circuit model significantly reduces computation time and requires less storage compared with full‐wave simulations. The results show that the hexagonal‐square metasurface absorber achieves exceptional absorption rates, with an average of 99.9% in the 431 to 532 nm wavelength range and over 90% in the 300 to 915 nm range. The hexagonal‐hexagonal metasurface absorber also exhibits high absorption rates, with an average of over 99% in the 431 to 518 nm and 700 to 780 nm ranges, and over 90% in the 300 to 940 nm range. The absorption performance of the proposed hexagonal‐circle metasurface absorber is also remarkable, with an absorption value of over 99% in the 670 to 771 nm range and above 90% in the 365 to 991 nm range. These models can be utilized to design and simulate other subwavelength absorbers in a broad frequency range, including terahertz and visible light, making them suitable for various applications.