Simultaneous synthesis of sulfonated reduced graphene oxide@graphene oxide hybrid material for efficient electrochemical sensing of silver ions in drinking water

One of the most important concerns around the world nowadays is the drinking water quality. Silver ions (Ag⁺) are one of the heavy metal ions that can seriously degrade the water quality and therefore, the human health. Hence, the World Health Organization (WHO) fixed the maximum acceptable concentration of these ions in drinking water at approximately 0.93 µM. Thus, the development of cost-effective and efficient techniques and tools that can help to quantify Ag⁺ ions in drinking water is of great importance. Herein, we used a new, simple, eco-friendly and low-cost synthesis route to synthesize a sustainable hybrid carbon material, namely sulfonated reduced graphene oxide@graphene oxide (S-rGO@GO) that was utilized as electrode material for Ag⁺ ions electroanalysis in drinking water. The successful synthesis of S-rGO@GO was evidenced by XRD, Raman spectroscopy, XPS, FE-SEM and EDX. The electrochemical characterization of S-rGO@GO revealed its good affinities towards Ag⁺ and its good electron transport abilities. The sensor prepared from S-rGO@GO (S-rGO@GO/GCE) showed good repeatability and reproducibility. S-rGO@GO/GCE optimization revealed that its best performance is achieved when 5 µL of 1 mg/mL of S-rGO@GO suspension in ultrapure water is used for its fabrication and when the electrodeposition (Ag⁺ to Ag⁰) is carried out at -0.1 V vs. SCE for 200 s. The calibration of S-rGO@GO/GCE exhibited a linear relationship in the concentration range of 0.2 to 1.4 µM, with a sensitivity of (0.605 ± 0.015) µA/µM; the statistic LOD was found to be 0.0007 µM. Furthermore, S-rGO@GO/GCE has shown a great potential for real samples analysis.