Filter cable design with defected conductor transmission structures

Electrical cables, as the industry’s blood vessels and nervous system, require evolving distributed filtering for complex electromagnetic environment adaptability. This article introduces a filter cable design featuring an insulated cylinder coated with a defected conductor transmission structure (DCTS). The DCTS, with a well-designed etched pattern, functions as a boundary condition for transmitting specific frequency electromagnetic waves, similar to a lumped filter circuit. To validate this method, a low-pass filter cable is proposed with six-slot-ring defected structures, utilizing polytetrafluoroethylene as the inner dielectric, encased within a flexible printed circuit board (FPCB)-manufactured DCTS. The proposed cable, with precise dimensions (2.4 mm diameter, 340 mm length), demonstrates minimal insertion loss ( < 0.38 dB below 6 GHz) in the passband and rejection exceeding 23 dB at 7.7-25 GHz in the stopband. Further enhancements achieve attenuation exceeding 50 dB in the stopband (7.1 GHz to 20 GHz). Compared to traditional cables, this filter cable addresses electromagnetic compatibility (EMC) by cutting off the interference coupling path. Yunan Han et al. present a filter cable design which can apply filtering throughout the cable’s length. The defected conductor transmission structures serve as a boundary condition for transmitted waves to achieve similar performance to a lumped filter circuit.