Ultrasonic powder consolidation of metallic glass/Al-6061 composites

Traditional powder consolidation methods for fabricating metallic matrix composites often require high temperatures, high pressures, and substantial energy consumption. Therefore, developing new processing technologies that can manufacture composites rapidly, efficiently, and economically is crucial. This study introduces ultrasonic powder consolidation process as a novel strategy for fabricating and tuning metallic glass (MG) and aluminum alloy composites. By optimizing the mass ratios of Zr₅₅Cu₃₀Ni₅Al₁₀ (at.%) MG to Al-6061 powders, a diverse range of composites with tailored compressive strength and plasticity was achieved. Mechanical testing showed that increasing the aluminum content improved plasticity while maintaining significant strength. Notably, the composite with a 5:5 mass ratio exhibited the best balance of mechanical properties. Morphological characterizations demonstrated excellent densification and uniformity in the composites, with no visible defects and relative densities ranging from approximately 92 %–99 %. Detailed microstructural analysis revealed the formation of a well-bonded interface with a diffusion layer, confirming the metallurgical bonding was facilitated by ultrasonic vibration. Furthermore, the ultrasonic consolidation process enabled the successful fabrication of complex shapes, such as star and gear components, demonstrating the method's potential for advanced manufacturing. These results show that the ultrasonic powder consolidation process is a viable and efficient approach for producing high-quality MG/Al-6061 composites with enhanced mechanical performance and application versatility.