Tailoring the vibration characteristics of carbon fiber-reinforced polylactic acid in fused filament fabrication process

The Fused Filament Fabrication (FFF) process has gained significant attention for its ability to manufacture parts using advanced polymeric materials, such as carbon fiber-reinforced polylactic acid (CF-PLA). By adjusting the printing process parameters of the CF-PLA, the optimized mechanical properties can be achieved with less chances of flaws. Structural integrity of the components plays an important role in analyzing the durability of the product which can be analyzed using modal analysis. This research study focuses on analyzing the effect of process parameters on the vibration damping characteristics of CF-PLA components produced by the FFF process. The Taguchi method is used to model the relationship between process parameters and vibration performance metrics. Based on the vibration study, the optimal process parameters were determined as 60% infill density, 0.08 mm slice thickness, and hexagonal pattern. This study shows that the natural frequency and damping increases with increase in infill percent but decreases with increase in slice thickness. The closely aligned values between the predicted and experimental results suggest that the developed model is effective in predicting the vibration characteristics of CF-PLA composites. By accurately adjusting the process parameters, the study’s findings—such as frequencies and damping ratio—provide manufacturers with important and dependable CF-PLA Fused Deposition Modeling components.