使用刷石和氢氧化钙在液晶 3D 打印机上制作磷酸钙模型

IF 1.8 4区材料科学 Q2 MATERIALS SCIENCE, CERAMICS Journal of the Australian Ceramic Society Pub Date : 2024-09-05 DOI:10.1007/s41779-024-01076-w

Yuta Otsuka, Tomohiro Masuzaki, Masahiro Nishimura, Hiroshi Kono, Masafumi Kikuchi

{"title":"使用刷石和氢氧化钙在液晶 3D 打印机上制作磷酸钙模型","authors":"Yuta Otsuka, Tomohiro Masuzaki, Masahiro Nishimura, Hiroshi Kono, Masafumi Kikuchi","doi":"10.1007/s41779-024-01076-w","DOIUrl":null,"url":null,"abstract":"<p>There is demand for the development of highly functional and flexible bone fillers to treat bone defects. This research aimed to fabricate calcium phosphate implants with a flexible porous design and sufficient compressive stress using a three-dimensional 3D printer. A mixed slurry of dicalcium phosphate, calcium hydroxide, photopolymerized resin, and polyethylene glycol (PEG) was prepared using a planetary ball mill. The slurry was formed into a porous model using a stereolithography-type 3D printer. Upon sintering, the resin and PEG evaporated and/or combusted, yielding a β- tricalcium phosphate (TCP) molding with porosity. This study proposes a novel method for freely molding calcium phosphate implants.</p>","PeriodicalId":673,"journal":{"name":"Journal of the Australian Ceramic Society","volume":null,"pages":null},"PeriodicalIF":1.8000,"publicationDate":"2024-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Modeling of calcium phosphate based on an LCD 3D printer using brushite and calcium hydroxide\",\"authors\":\"Yuta Otsuka, Tomohiro Masuzaki, Masahiro Nishimura, Hiroshi Kono, Masafumi Kikuchi\",\"doi\":\"10.1007/s41779-024-01076-w\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>There is demand for the development of highly functional and flexible bone fillers to treat bone defects. This research aimed to fabricate calcium phosphate implants with a flexible porous design and sufficient compressive stress using a three-dimensional 3D printer. A mixed slurry of dicalcium phosphate, calcium hydroxide, photopolymerized resin, and polyethylene glycol (PEG) was prepared using a planetary ball mill. The slurry was formed into a porous model using a stereolithography-type 3D printer. Upon sintering, the resin and PEG evaporated and/or combusted, yielding a β- tricalcium phosphate (TCP) molding with porosity. This study proposes a novel method for freely molding calcium phosphate implants.</p>\",\"PeriodicalId\":673,\"journal\":{\"name\":\"Journal of the Australian Ceramic Society\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.8000,\"publicationDate\":\"2024-09-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of the Australian Ceramic Society\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s41779-024-01076-w\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Australian Ceramic Society","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s41779-024-01076-w","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}

引用次数: 0

摘要

人们需要开发高功能性和柔性骨填充物来治疗骨缺损。本研究旨在使用三维 3D 打印机制造具有柔性多孔设计和足够压应力的磷酸钙植入体。使用行星球磨机制备了磷酸二钙、氢氧化钙、光聚合树脂和聚乙二醇（PEG）的混合浆料。使用立体光刻式 3D 打印机将浆料制成多孔模型。烧结时，树脂和聚乙二醇蒸发和/或燃烧，产生了具有多孔性的β-磷酸三钙（TCP）模塑。本研究提出了一种自由成型磷酸钙植入物的新方法。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

摘要图片

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Modeling of calcium phosphate based on an LCD 3D printer using brushite and calcium hydroxide

There is demand for the development of highly functional and flexible bone fillers to treat bone defects. This research aimed to fabricate calcium phosphate implants with a flexible porous design and sufficient compressive stress using a three-dimensional 3D printer. A mixed slurry of dicalcium phosphate, calcium hydroxide, photopolymerized resin, and polyethylene glycol (PEG) was prepared using a planetary ball mill. The slurry was formed into a porous model using a stereolithography-type 3D printer. Upon sintering, the resin and PEG evaporated and/or combusted, yielding a β- tricalcium phosphate (TCP) molding with porosity. This study proposes a novel method for freely molding calcium phosphate implants.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of the Australian Ceramic Society Materials Science-Materials Chemistry

CiteScore

3.70

自引率

5.30%

发文量

123

期刊介绍： Publishes high quality research and technical papers in all areas of ceramic and related materials Spans the broad and growing fields of ceramic technology, material science and bioceramics Chronicles new advances in ceramic materials, manufacturing processes and applications Journal of the Australian Ceramic Society since 1965 Professional language editing service is available through our affiliates Nature Research Editing Service and American Journal Experts at the author''s cost and does not guarantee that the manuscript will be reviewed or accepted