Stable and sustainable perovskite solar modules by optimizing blade coating nickel oxide deposition over 15 × 15 cm2 area

Perovskite solar cells have rapidly advanced, achieving over 26% power conversion efficiency on the laboratory scale. However, transitioning to large-scale production remains a challenge due to limitations in conventional fabrication methods like spin coating. Here, we introduce an optimized blade coating process for the scalable fabrication of large-area (15 cm × 15 cm) perovskite solar modules with a nickel oxide hole transport layer, performed in ambient air and utilizing a non-toxic solvent system. Self-assembled monolayers between the nickel oxide and perovskite layer improve the uniformity and morphology of the perovskite film. Perovskite solar modules with a 110 cm2 active area achieve a power conversion efficiency of 12.6%. Moreover, encapsulated modules retained 84% of their initial efficiency after 1,000 hours at 85 °C in air (ISOS-T-1). This study demonstrates progress in the large-scale production of perovskite solar cells that combine efficiency with long-term stability. Perovskite solar cells and have shown great promise on the lab scale, but work is needed to scale-up their fabrication. Here, blade coating is used to fabricate 15 cm×15 cm perovskite modules with a nickel oxide hole transport layer, achieving high power conversion efficiency and stability.