Qianyu Wang , Yuming Zhang , Yuhua Zheng , Emmanuel Oluwaseyi Fagbohun , Yanbin Cui
{"title":"通过吸附和芬顿类降解去除水中甲基橙的磁性活性炭","authors":"Qianyu Wang , Yuming Zhang , Yuhua Zheng , Emmanuel Oluwaseyi Fagbohun , Yanbin Cui","doi":"10.1016/j.partic.2024.08.014","DOIUrl":null,"url":null,"abstract":"<div><p>Water pollution caused by organic dyes is a critical environmental issue. Although activated carbon (AC) is commonly used for dye adsorption, its effectiveness is limited by challenges in separation and regeneration. To address these limitations, a convenient recyclable magnetic activated carbon (MAC) was fabricated via co-precipitation and calcination method, serving as adsorbent and catalyst for methyl orange (MO) removal through a Fenton-like degradation process. Characterization techniques, including XRD, FTIR, SEM and TEM, confirmed that Fe<sub>3</sub>O<sub>4</sub> nanoparticles (10–20 nm) were uniformly dispersed on AC surface. The MAC maintaining a high surface area (997 m<sup>2</sup>/g) and pore volume (0.795 cm<sup>3</sup>/g) and exhibited superparamagnetic properties with a saturated magnetization of 5.52 emu/g, enabling effective separation from aqueous solutions by magnet. Batch adsorption studies revealed that MO adsorption onto MAC followed pseudo-second-order kinetic and Freundlich isotherm model, with a maximum adsorption capacity of 205 mg/g at 25 °C. Thermodynamic analysis showed that the adsorption process was spontaneous and endothermic. Simultaneous degradation of MO and in-situ regeneration of MAC were achieved via Fenton-like reaction using sodium persulfate (PS). Under a PS concentration of 9 mmol/L, the MO removal efficiency near 95% after 60 min, with a total organic carbon (TOC) reduction of 83.1%. The reaction of Fe<sub>3</sub>O<sub>4</sub> and oxygen functional groups on AC surface with PS facilitated the generation of <span><math><mrow><msubsup><mtext>SO</mtext><mn>4</mn><mrow><mo>•</mo><mo>-</mo></mrow></msubsup></mrow></math></span>, thereby enhancing catalytic degradation of MO. The degradation efficiency improved as the temperature increased from 25 °C to 45 °C. Cycle tests demonstrated that the MO removal efficiency of MAC remained above 90% after 5 cycles of regeneration. Overall, this study highlights the potential of MAC for efficient removal of organic dyes from water through the coupling of adsorption and Fenton-like degradation, providing a promising solution for addressing water pollution challenges.</p></div>","PeriodicalId":401,"journal":{"name":"Particuology","volume":"94 ","pages":"Pages 314-326"},"PeriodicalIF":4.1000,"publicationDate":"2024-09-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Magnetic activated carbon for the removal of methyl orange from water via adsorption and Fenton-like degradation\",\"authors\":\"Qianyu Wang , Yuming Zhang , Yuhua Zheng , Emmanuel Oluwaseyi Fagbohun , Yanbin Cui\",\"doi\":\"10.1016/j.partic.2024.08.014\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Water pollution caused by organic dyes is a critical environmental issue. Although activated carbon (AC) is commonly used for dye adsorption, its effectiveness is limited by challenges in separation and regeneration. To address these limitations, a convenient recyclable magnetic activated carbon (MAC) was fabricated via co-precipitation and calcination method, serving as adsorbent and catalyst for methyl orange (MO) removal through a Fenton-like degradation process. Characterization techniques, including XRD, FTIR, SEM and TEM, confirmed that Fe<sub>3</sub>O<sub>4</sub> nanoparticles (10–20 nm) were uniformly dispersed on AC surface. The MAC maintaining a high surface area (997 m<sup>2</sup>/g) and pore volume (0.795 cm<sup>3</sup>/g) and exhibited superparamagnetic properties with a saturated magnetization of 5.52 emu/g, enabling effective separation from aqueous solutions by magnet. Batch adsorption studies revealed that MO adsorption onto MAC followed pseudo-second-order kinetic and Freundlich isotherm model, with a maximum adsorption capacity of 205 mg/g at 25 °C. Thermodynamic analysis showed that the adsorption process was spontaneous and endothermic. Simultaneous degradation of MO and in-situ regeneration of MAC were achieved via Fenton-like reaction using sodium persulfate (PS). Under a PS concentration of 9 mmol/L, the MO removal efficiency near 95% after 60 min, with a total organic carbon (TOC) reduction of 83.1%. The reaction of Fe<sub>3</sub>O<sub>4</sub> and oxygen functional groups on AC surface with PS facilitated the generation of <span><math><mrow><msubsup><mtext>SO</mtext><mn>4</mn><mrow><mo>•</mo><mo>-</mo></mrow></msubsup></mrow></math></span>, thereby enhancing catalytic degradation of MO. The degradation efficiency improved as the temperature increased from 25 °C to 45 °C. Cycle tests demonstrated that the MO removal efficiency of MAC remained above 90% after 5 cycles of regeneration. Overall, this study highlights the potential of MAC for efficient removal of organic dyes from water through the coupling of adsorption and Fenton-like degradation, providing a promising solution for addressing water pollution challenges.</p></div>\",\"PeriodicalId\":401,\"journal\":{\"name\":\"Particuology\",\"volume\":\"94 \",\"pages\":\"Pages 314-326\"},\"PeriodicalIF\":4.1000,\"publicationDate\":\"2024-09-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Particuology\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S167420012400169X\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Particuology","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S167420012400169X","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0
摘要
有机染料造成的水污染是一个严重的环境问题。虽然活性炭(AC)常用于染料吸附,但其有效性受到分离和再生难题的限制。为了解决这些局限性,研究人员通过共沉淀和煅烧方法制备了一种方便回收的磁性活性炭(MAC),作为吸附剂和催化剂,通过类似芬顿的降解过程去除甲基橙(MO)。XRD、FTIR、SEM 和 TEM 等表征技术证实,Fe3O4 纳米颗粒(10-20 nm)均匀地分散在 AC 表面。这种 MAC 可保持较高的表面积(997 m2/g)和孔隙率(0.795 cm3/g),并具有超顺磁性能,其饱和磁化率为 5.52 emu/g,可通过磁铁从水溶液中有效分离。批量吸附研究表明,MO 在 MAC 上的吸附遵循伪二阶动力学和 Freundlich 等温线模型,25 °C 时的最大吸附容量为 205 mg/g。热力学分析表明,吸附过程是自发和内热的。通过使用过硫酸钠(PS)进行类似芬顿反应,实现了 MO 的同时降解和 MAC 的原位再生。在 PS 浓度为 9 mmol/L 的条件下,60 分钟后 MO 的去除率接近 95%,总有机碳(TOC)的去除率为 83.1%。AC 表面的 Fe3O4 和氧官能团与 PS 反应,促进了 SO4--的生成,从而增强了对 MO 的催化降解。降解效率随着温度从 25 °C 升至 45 °C 而提高。循环测试表明,MAC 的 MO 去除率在再生 5 次后仍保持在 90% 以上。总之,这项研究强调了 MAC 通过吸附和 Fenton 类降解的耦合作用高效去除水中有机染料的潜力,为解决水污染难题提供了一种前景广阔的解决方案。
Magnetic activated carbon for the removal of methyl orange from water via adsorption and Fenton-like degradation
Water pollution caused by organic dyes is a critical environmental issue. Although activated carbon (AC) is commonly used for dye adsorption, its effectiveness is limited by challenges in separation and regeneration. To address these limitations, a convenient recyclable magnetic activated carbon (MAC) was fabricated via co-precipitation and calcination method, serving as adsorbent and catalyst for methyl orange (MO) removal through a Fenton-like degradation process. Characterization techniques, including XRD, FTIR, SEM and TEM, confirmed that Fe3O4 nanoparticles (10–20 nm) were uniformly dispersed on AC surface. The MAC maintaining a high surface area (997 m2/g) and pore volume (0.795 cm3/g) and exhibited superparamagnetic properties with a saturated magnetization of 5.52 emu/g, enabling effective separation from aqueous solutions by magnet. Batch adsorption studies revealed that MO adsorption onto MAC followed pseudo-second-order kinetic and Freundlich isotherm model, with a maximum adsorption capacity of 205 mg/g at 25 °C. Thermodynamic analysis showed that the adsorption process was spontaneous and endothermic. Simultaneous degradation of MO and in-situ regeneration of MAC were achieved via Fenton-like reaction using sodium persulfate (PS). Under a PS concentration of 9 mmol/L, the MO removal efficiency near 95% after 60 min, with a total organic carbon (TOC) reduction of 83.1%. The reaction of Fe3O4 and oxygen functional groups on AC surface with PS facilitated the generation of , thereby enhancing catalytic degradation of MO. The degradation efficiency improved as the temperature increased from 25 °C to 45 °C. Cycle tests demonstrated that the MO removal efficiency of MAC remained above 90% after 5 cycles of regeneration. Overall, this study highlights the potential of MAC for efficient removal of organic dyes from water through the coupling of adsorption and Fenton-like degradation, providing a promising solution for addressing water pollution challenges.
期刊介绍:
The word ‘particuology’ was coined to parallel the discipline for the science and technology of particles.
Particuology is an interdisciplinary journal that publishes frontier research articles and critical reviews on the discovery, formulation and engineering of particulate materials, processes and systems. It especially welcomes contributions utilising advanced theoretical, modelling and measurement methods to enable the discovery and creation of new particulate materials, and the manufacturing of functional particulate-based products, such as sensors.
Papers are handled by Thematic Editors who oversee contributions from specific subject fields. These fields are classified into: Particle Synthesis and Modification; Particle Characterization and Measurement; Granular Systems and Bulk Solids Technology; Fluidization and Particle-Fluid Systems; Aerosols; and Applications of Particle Technology.
Key topics concerning the creation and processing of particulates include:
-Modelling and simulation of particle formation, collective behaviour of particles and systems for particle production over a broad spectrum of length scales
-Mining of experimental data for particle synthesis and surface properties to facilitate the creation of new materials and processes
-Particle design and preparation including controlled response and sensing functionalities in formation, delivery systems and biological systems, etc.
-Experimental and computational methods for visualization and analysis of particulate system.
These topics are broadly relevant to the production of materials, pharmaceuticals and food, and to the conversion of energy resources to fuels and protection of the environment.