Research and analysis of rock breaking mechanical model of single-roller PDC compound bit

In order to improve wear resistance and rock breaking efficiency of single-roller bit, a new type of bit, single-roller PDC compound bit is designed. The mechanical model of interaction between PDC teeth and rock of single-roller PDC compound bit is established, and the theoretical calculation formula of resultant force and torque generated by interaction between PDC teeth and rock on cone and bit is obtained. The rock-breaking experiment on the single-roller PDC compound bit are carried out. The results show that with the increase of front inclination angle, the axial force and radial force of PDC teeth decrease greatly at first and then tend to be stable, while the tangential force of PDC teeth decreases at first and then increases slightly; the axial force, radial force and tangential force all increase with the increase of the cutting depth; the maximum values of the three forces all appear at the position of the combined effect of the maximum cutting depth and the minimum front inclination angle. The maximum value of moment [Formula: see text] and [Formula: see text] both appear at the minimum value of h C and δ, while the maximum value of moment [Formula: see text] appears at the minimum value of δ. In order to reduce the acting moment generated by PDC cutter on the roller, the PDC cutter at different position heights can be designed with different front inclination angles. The rock breaking experiment results show that compared with the common single-roller bit, the single-roller PDC compound bit has higher rock breaking efficiency and better development prospect. When drilling in hard limestone, the single-roller PDC compound bit is more energy-efficient under higher WOB.