Shabnam Khan, Aadil Rashid Lone, Mohammad Yasir Khan, Sabiar Rahaman, Kavita Pandey, Aasif Helal, Farasha Sama, M. Shahid
{"title":"用工程胺官能化金属有机框架制造具有超高性能的下一代不对称超级电容器复合材料:调节储能屏障","authors":"Shabnam Khan, Aadil Rashid Lone, Mohammad Yasir Khan, Sabiar Rahaman, Kavita Pandey, Aasif Helal, Farasha Sama, M. Shahid","doi":"10.1021/acs.langmuir.4c02522","DOIUrl":null,"url":null,"abstract":"The present work summarizes the fabrication of an amine-functionalized cadmium-based metal–organic framework (MOF), {[Cd(AT)(BP)]·4DMF}<sub><i>n</i></sub> or <b>Cd_AT-BP</b>, by adopting a simple solvothermal approach using 2-aminoterephthalic acid (AT) as the main linker, while 4,4′-bipyridyl (BP) as an auxiliary linker. The structure of <b>Cd_AT-BP</b> was validated by the single-crystal X-ray diffraction technique that revealed the formation of an overall three-dimensional network with BP acting as a bridge between the 2D sheets of the MOF. The robust framework of <b>Cd_AT-BP</b> decorated with a free amine functional group was utilized for energy storage application. The electrochemical measurements of <b>Cd_AT-BP</b> revealed a maximum areal capacitance of 9.8 mF/cm<sup>2</sup> at a scan rate of 5 mV/s. Further, to enhance the practical utility of <b>Cd_AT-BP</b> in energy storage devices, two composites of <b>Cd_AT-BP</b> with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (CNTs), viz., <b>Cd_AT-BP/rGO</b> and <b>Cd_AT-BP/CNT</b>, were prepared by adopting a facile ultrasonication approach. The synthesized <b>Cd_AT-BP/rGO</b> and <b>Cd_AT-BP/CNT</b> composites displayed an impressive areal capacitance of 117 and 37 mF/cm<sup>2</sup> (58.5 and 17.5 F/g) at a scan rate of 5 mV/s, respectively, and a capacitance retention of up to 118 and 100% after 5000 cycles at a constant current density of 5 mA/cm<sup>2</sup>. The highest energy density of about 4.23 mW h/cm<sup>2</sup> (2.12 W h/kg) at a current density of 1 mA/cm<sup>2</sup> was shown by <b>Cd_AT-BP/rGO</b> among all the three materials attributable to the layered structure of rGO, providing a larger surface area accessible for ion adsorption. Enticed by the remarkable outcomes exhibited by <b>Cd_AT-BP/rGO</b>, we fabricated a two-electrode asymmetric supercapacitor (ASC) device. The developed ASC device revealed energy and power densities of 26.7 mW h/cm<sup>2</sup> (13.4 W h/kg) and 3760 mW/cm<sup>2</sup> (1880 W/kg), respectively, with a galvanostatic charge–discharge stability of up to 10,000 cycles. The findings identify <b>Cd_AT-BP/rGO</b> as a potential contender for future-generation supercapacitors.","PeriodicalId":3,"journal":{"name":"ACS Applied Electronic Materials","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Engineered Amine-Functionalized Metal–Organic Framework to Fabricate a Composite for Next-Generation Asymmetric Supercapacitors with Ultrahigh Performance: Modulating the Energy Storage Barrier\",\"authors\":\"Shabnam Khan, Aadil Rashid Lone, Mohammad Yasir Khan, Sabiar Rahaman, Kavita Pandey, Aasif Helal, Farasha Sama, M. Shahid\",\"doi\":\"10.1021/acs.langmuir.4c02522\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The present work summarizes the fabrication of an amine-functionalized cadmium-based metal–organic framework (MOF), {[Cd(AT)(BP)]·4DMF}<sub><i>n</i></sub> or <b>Cd_AT-BP</b>, by adopting a simple solvothermal approach using 2-aminoterephthalic acid (AT) as the main linker, while 4,4′-bipyridyl (BP) as an auxiliary linker. The structure of <b>Cd_AT-BP</b> was validated by the single-crystal X-ray diffraction technique that revealed the formation of an overall three-dimensional network with BP acting as a bridge between the 2D sheets of the MOF. The robust framework of <b>Cd_AT-BP</b> decorated with a free amine functional group was utilized for energy storage application. The electrochemical measurements of <b>Cd_AT-BP</b> revealed a maximum areal capacitance of 9.8 mF/cm<sup>2</sup> at a scan rate of 5 mV/s. Further, to enhance the practical utility of <b>Cd_AT-BP</b> in energy storage devices, two composites of <b>Cd_AT-BP</b> with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (CNTs), viz., <b>Cd_AT-BP/rGO</b> and <b>Cd_AT-BP/CNT</b>, were prepared by adopting a facile ultrasonication approach. The synthesized <b>Cd_AT-BP/rGO</b> and <b>Cd_AT-BP/CNT</b> composites displayed an impressive areal capacitance of 117 and 37 mF/cm<sup>2</sup> (58.5 and 17.5 F/g) at a scan rate of 5 mV/s, respectively, and a capacitance retention of up to 118 and 100% after 5000 cycles at a constant current density of 5 mA/cm<sup>2</sup>. The highest energy density of about 4.23 mW h/cm<sup>2</sup> (2.12 W h/kg) at a current density of 1 mA/cm<sup>2</sup> was shown by <b>Cd_AT-BP/rGO</b> among all the three materials attributable to the layered structure of rGO, providing a larger surface area accessible for ion adsorption. Enticed by the remarkable outcomes exhibited by <b>Cd_AT-BP/rGO</b>, we fabricated a two-electrode asymmetric supercapacitor (ASC) device. The developed ASC device revealed energy and power densities of 26.7 mW h/cm<sup>2</sup> (13.4 W h/kg) and 3760 mW/cm<sup>2</sup> (1880 W/kg), respectively, with a galvanostatic charge–discharge stability of up to 10,000 cycles. The findings identify <b>Cd_AT-BP/rGO</b> as a potential contender for future-generation supercapacitors.\",\"PeriodicalId\":3,\"journal\":{\"name\":\"ACS Applied Electronic Materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-09-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Applied Electronic Materials\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://doi.org/10.1021/acs.langmuir.4c02522\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Electronic Materials","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1021/acs.langmuir.4c02522","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Engineered Amine-Functionalized Metal–Organic Framework to Fabricate a Composite for Next-Generation Asymmetric Supercapacitors with Ultrahigh Performance: Modulating the Energy Storage Barrier
The present work summarizes the fabrication of an amine-functionalized cadmium-based metal–organic framework (MOF), {[Cd(AT)(BP)]·4DMF}n or Cd_AT-BP, by adopting a simple solvothermal approach using 2-aminoterephthalic acid (AT) as the main linker, while 4,4′-bipyridyl (BP) as an auxiliary linker. The structure of Cd_AT-BP was validated by the single-crystal X-ray diffraction technique that revealed the formation of an overall three-dimensional network with BP acting as a bridge between the 2D sheets of the MOF. The robust framework of Cd_AT-BP decorated with a free amine functional group was utilized for energy storage application. The electrochemical measurements of Cd_AT-BP revealed a maximum areal capacitance of 9.8 mF/cm2 at a scan rate of 5 mV/s. Further, to enhance the practical utility of Cd_AT-BP in energy storage devices, two composites of Cd_AT-BP with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (CNTs), viz., Cd_AT-BP/rGO and Cd_AT-BP/CNT, were prepared by adopting a facile ultrasonication approach. The synthesized Cd_AT-BP/rGO and Cd_AT-BP/CNT composites displayed an impressive areal capacitance of 117 and 37 mF/cm2 (58.5 and 17.5 F/g) at a scan rate of 5 mV/s, respectively, and a capacitance retention of up to 118 and 100% after 5000 cycles at a constant current density of 5 mA/cm2. The highest energy density of about 4.23 mW h/cm2 (2.12 W h/kg) at a current density of 1 mA/cm2 was shown by Cd_AT-BP/rGO among all the three materials attributable to the layered structure of rGO, providing a larger surface area accessible for ion adsorption. Enticed by the remarkable outcomes exhibited by Cd_AT-BP/rGO, we fabricated a two-electrode asymmetric supercapacitor (ASC) device. The developed ASC device revealed energy and power densities of 26.7 mW h/cm2 (13.4 W h/kg) and 3760 mW/cm2 (1880 W/kg), respectively, with a galvanostatic charge–discharge stability of up to 10,000 cycles. The findings identify Cd_AT-BP/rGO as a potential contender for future-generation supercapacitors.