{"title":"用于北极寒冷地区钻井的井筒与永久冻土之间的水热耦合模型","authors":"","doi":"10.1016/j.ijheatmasstransfer.2024.126236","DOIUrl":null,"url":null,"abstract":"<div><div>The abundant oil and natural gas resources in the Arctic cold regions have driven people to conduct drilling operations in these harsh environments. During drilling operations in Arctic permafrost regions, the linear heat source effect generated by the flow of drilling fluid in the wellbore continuously melts the surrounding permafrost, which can lead to wellhead settlement and instability of the wellbore wall, among other accidents. In order to provide guidance for drilling engineering in cold regions, there is an urgent need to study the coupled heat transfer between the wellbore and the permafrost in Arctic drilling. Due to the significant influence of hydrothermal coupling process in permafrost on temperature transfer, conventional wellbore heat transfer models are not suitable. Therefore, this paper proposes a hydrothermal coupling model between the wellbore and permafrost for drilling in Arctic cold regions and analyzes the heat transfer in the wellbore and the hydrothermal processes of the formation using numerical methods. By applying this model, the insulation effects of existing main wellbore temperature control and insulation technologies were studied. The main research findings indicate that drilling process can cause the permafrost around the wellbore to thaw, and the thawed permafrost around the wellbore presents a “horn” shape that expands from the wellhead to the bottom of permafrost layer; Without insulation measures, the volume of thawed permafrost around the wellbore can reach 315 m³ after 7 days of circulation; During the drilling process, moisture migration occurs. Under the effect of gravitational seepage, unfrozen water content in the thawed permafrsot around the wellbore increases from the wellhead to the bottom of the permafrsot layer; Vacuum insulated tubing has almost negligible impact on the temperature of the drilling fluid in the wellbore, while it can reduce the volume of thawed permafrost around the wellbore by 62.5 % to 88 % or even higher; Drilling fluid cooling systems can significantly lower the temperature of the drilling fluid in the wellbore but cannot effectively prevent the thawing of permafrost around the wellbore. Therefore, in practical drilling operations, priority should be given to using high-quality vacuum insulated tubing or combining both methods simultaneously.</div></div>","PeriodicalId":336,"journal":{"name":"International Journal of Heat and Mass Transfer","volume":null,"pages":null},"PeriodicalIF":5.0000,"publicationDate":"2024-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Hydrothermal coupling model between wellbore and permafrost for drilling in arctic cold regions\",\"authors\":\"\",\"doi\":\"10.1016/j.ijheatmasstransfer.2024.126236\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>The abundant oil and natural gas resources in the Arctic cold regions have driven people to conduct drilling operations in these harsh environments. During drilling operations in Arctic permafrost regions, the linear heat source effect generated by the flow of drilling fluid in the wellbore continuously melts the surrounding permafrost, which can lead to wellhead settlement and instability of the wellbore wall, among other accidents. In order to provide guidance for drilling engineering in cold regions, there is an urgent need to study the coupled heat transfer between the wellbore and the permafrost in Arctic drilling. Due to the significant influence of hydrothermal coupling process in permafrost on temperature transfer, conventional wellbore heat transfer models are not suitable. Therefore, this paper proposes a hydrothermal coupling model between the wellbore and permafrost for drilling in Arctic cold regions and analyzes the heat transfer in the wellbore and the hydrothermal processes of the formation using numerical methods. By applying this model, the insulation effects of existing main wellbore temperature control and insulation technologies were studied. The main research findings indicate that drilling process can cause the permafrost around the wellbore to thaw, and the thawed permafrost around the wellbore presents a “horn” shape that expands from the wellhead to the bottom of permafrost layer; Without insulation measures, the volume of thawed permafrost around the wellbore can reach 315 m³ after 7 days of circulation; During the drilling process, moisture migration occurs. Under the effect of gravitational seepage, unfrozen water content in the thawed permafrsot around the wellbore increases from the wellhead to the bottom of the permafrsot layer; Vacuum insulated tubing has almost negligible impact on the temperature of the drilling fluid in the wellbore, while it can reduce the volume of thawed permafrost around the wellbore by 62.5 % to 88 % or even higher; Drilling fluid cooling systems can significantly lower the temperature of the drilling fluid in the wellbore but cannot effectively prevent the thawing of permafrost around the wellbore. Therefore, in practical drilling operations, priority should be given to using high-quality vacuum insulated tubing or combining both methods simultaneously.</div></div>\",\"PeriodicalId\":336,\"journal\":{\"name\":\"International Journal of Heat and Mass Transfer\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.0000,\"publicationDate\":\"2024-09-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Heat and Mass Transfer\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0017931024010652\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Heat and Mass Transfer","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0017931024010652","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Hydrothermal coupling model between wellbore and permafrost for drilling in arctic cold regions
The abundant oil and natural gas resources in the Arctic cold regions have driven people to conduct drilling operations in these harsh environments. During drilling operations in Arctic permafrost regions, the linear heat source effect generated by the flow of drilling fluid in the wellbore continuously melts the surrounding permafrost, which can lead to wellhead settlement and instability of the wellbore wall, among other accidents. In order to provide guidance for drilling engineering in cold regions, there is an urgent need to study the coupled heat transfer between the wellbore and the permafrost in Arctic drilling. Due to the significant influence of hydrothermal coupling process in permafrost on temperature transfer, conventional wellbore heat transfer models are not suitable. Therefore, this paper proposes a hydrothermal coupling model between the wellbore and permafrost for drilling in Arctic cold regions and analyzes the heat transfer in the wellbore and the hydrothermal processes of the formation using numerical methods. By applying this model, the insulation effects of existing main wellbore temperature control and insulation technologies were studied. The main research findings indicate that drilling process can cause the permafrost around the wellbore to thaw, and the thawed permafrost around the wellbore presents a “horn” shape that expands from the wellhead to the bottom of permafrost layer; Without insulation measures, the volume of thawed permafrost around the wellbore can reach 315 m³ after 7 days of circulation; During the drilling process, moisture migration occurs. Under the effect of gravitational seepage, unfrozen water content in the thawed permafrsot around the wellbore increases from the wellhead to the bottom of the permafrsot layer; Vacuum insulated tubing has almost negligible impact on the temperature of the drilling fluid in the wellbore, while it can reduce the volume of thawed permafrost around the wellbore by 62.5 % to 88 % or even higher; Drilling fluid cooling systems can significantly lower the temperature of the drilling fluid in the wellbore but cannot effectively prevent the thawing of permafrost around the wellbore. Therefore, in practical drilling operations, priority should be given to using high-quality vacuum insulated tubing or combining both methods simultaneously.
期刊介绍:
International Journal of Heat and Mass Transfer is the vehicle for the exchange of basic ideas in heat and mass transfer between research workers and engineers throughout the world. It focuses on both analytical and experimental research, with an emphasis on contributions which increase the basic understanding of transfer processes and their application to engineering problems.
Topics include:
-New methods of measuring and/or correlating transport-property data
-Energy engineering
-Environmental applications of heat and/or mass transfer