Effect of glass infiltration and modified cooling rates on color characteristics alteration of monochrome and multilayer high yttrium oxide containing zirconia.

Background: Sintering technique impacted color of zirconia. This study examined the effect of glass infiltration and altering cooling rate on color alteration of monochrome (Mo) and multilayer (Mu) 5 mol% yttria-partially stabilized zirconia (5Y-PSZ).

Material and methods: 180 specimens (width, length, thickness = 10, 20, 2 mm) were prepared from Mo and Mu (comprising cervical (C) and incisal (I) zone) 5Y-PSZ shade VITA-A2. Unintentionally categorized samples (n=15/group) were sintered with traditional (T) versus glass infiltrated (G) technique and cooled down with slow (S: 5°C/min), normal (N: 35°C/min), and fast (F: 70°C/min). CIE-L*a*b* color characteristics were determined for translucency parameter (TP), contrast ratio (CR), opalescence parameter (OP), and color difference (∆Ediff). Microstructures were investigated with SEM and XRD. ANOVA and Tamhane's comparisons were determined for significant differences (p<0.05).

Results: TP and OP were significantly higher for Mo than MuC and MuI, but no significant difference in CR among them. Comparable ΔEdiff between Mo and MuC were indicated, but both were significantly lesser than MuL. Glass infiltration and raising cooling rate significantly decreased TP and OP, whereas increased CR and ΔEdiff, which amplified color alteration.

Conclusions: Glass infiltration sintering and modified cooling rate significantly altered color parameters of 5Y-PSZ. Monochrome demonstrated higher translucency and opalescence than multilayer, possibly due to colorant additives. Glass infiltration decreased translucency and opalescence due to different refractive indices. Increased cooling rate resulted in decreasing translucency and opalescence due to smaller grain size and t→m transformation. Nevertheless, altered sintering and cooling rates still rendered an acceptable color alteration. Key words:Cooling rate, glass infiltration, optical characteristics, translucency.