Yuliet Paez-Amieva, Noemí Mateo-Oliveras, José Miguel Martín-Martínez
{"title":"用聚酯和聚碳酸酯多元醇混合物合成的聚氨酯--支持 20 °C 时内在自愈合的非共价动态交换机制的新证据。","authors":"Yuliet Paez-Amieva, Noemí Mateo-Oliveras, José Miguel Martín-Martínez","doi":"10.3390/polym16202881","DOIUrl":null,"url":null,"abstract":"<p><p>Polyurethanes (PUs) synthesized with blends of polycarbonate and polyester polyols (CD+PEs) showed intrinsic self-healing at 20 °C. The decrease in the polycarbonate soft segments content increased the self-healing time and reduced the kinetics of self-healing of the PUs. The percentage of C-O species decreased and the ones of C-N and C=O species increased by increasing the polyester soft segments in the PUs, due to higher micro-phase separation. All PUs synthetized with CD+PE blends exhibited free carbonate species and interactions between the polycarbonate and polyester soft segments to a somewhat similar extent in all PUs. By increasing the polyester soft segments content, the storage moduli of the PUs decreased and the tan delta values increased, which resulted in favored polycarbonate soft segments interactions, and this was related to slower kinetics of self-healing at 20 °C. Although the PU made with a mixture of 20 wt.% CD and 80 wt.% PE showed cold crystallization and important crystallinity of the soft segments, as well as high storage moduli, the intercalation of a small amount of polycarbonate soft segments disturbed the interactions between the polyester soft segments, so it exhibited self-healing at 20 °C. The self-healing of the PUs was attributed to the physical interactions between polycarbonate soft segments themselves and with polyester soft segments, and, to a minor extent, to the mobility of the polymeric chains. Finally, the PUs made with 40 wt.% or more polyester polyol showed acceptable mechanical properties.</p>","PeriodicalId":20416,"journal":{"name":"Polymers","volume":null,"pages":null},"PeriodicalIF":4.7000,"publicationDate":"2024-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11511022/pdf/","citationCount":"0","resultStr":"{\"title\":\"Polyurethanes Synthesized with Blends of Polyester and Polycarbonate Polyols-New Evidence Supporting the Dynamic Non-Covalent Exchange Mechanism of Intrinsic Self-Healing at 20 °C.\",\"authors\":\"Yuliet Paez-Amieva, Noemí Mateo-Oliveras, José Miguel Martín-Martínez\",\"doi\":\"10.3390/polym16202881\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Polyurethanes (PUs) synthesized with blends of polycarbonate and polyester polyols (CD+PEs) showed intrinsic self-healing at 20 °C. The decrease in the polycarbonate soft segments content increased the self-healing time and reduced the kinetics of self-healing of the PUs. The percentage of C-O species decreased and the ones of C-N and C=O species increased by increasing the polyester soft segments in the PUs, due to higher micro-phase separation. All PUs synthetized with CD+PE blends exhibited free carbonate species and interactions between the polycarbonate and polyester soft segments to a somewhat similar extent in all PUs. By increasing the polyester soft segments content, the storage moduli of the PUs decreased and the tan delta values increased, which resulted in favored polycarbonate soft segments interactions, and this was related to slower kinetics of self-healing at 20 °C. Although the PU made with a mixture of 20 wt.% CD and 80 wt.% PE showed cold crystallization and important crystallinity of the soft segments, as well as high storage moduli, the intercalation of a small amount of polycarbonate soft segments disturbed the interactions between the polyester soft segments, so it exhibited self-healing at 20 °C. The self-healing of the PUs was attributed to the physical interactions between polycarbonate soft segments themselves and with polyester soft segments, and, to a minor extent, to the mobility of the polymeric chains. Finally, the PUs made with 40 wt.% or more polyester polyol showed acceptable mechanical properties.</p>\",\"PeriodicalId\":20416,\"journal\":{\"name\":\"Polymers\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.7000,\"publicationDate\":\"2024-10-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11511022/pdf/\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Polymers\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3390/polym16202881\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"POLYMER SCIENCE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymers","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3390/polym16202881","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 0
摘要
用聚碳酸酯和聚酯多元醇(CD+PEs)混合物合成的聚氨酯(PUs)在 20 °C 下显示出内在自愈性。聚碳酸酯软段含量的减少延长了自愈合时间,降低了 PU 的自愈合动力学。随着聚氨酯中聚酯软段含量的增加,C-O 物种的比例降低,而 C-N 和 C=O 物种的比例增加,这是由于微相分离度提高所致。用 CD+PE 混合物合成的所有聚氨酯都表现出游离碳酸酯物种,聚碳酸酯和聚酯软段之间的相互作用在所有聚氨酯中的程度也大致相同。随着聚酯软段含量的增加,聚氨酯的贮存模量降低,tan delta 值增加,这导致聚碳酸酯软段之间的相互作用更有利,这与 20 °C 时自愈合动力学变慢有关。虽然用 20 wt.% CD 和 80 wt.% PE 混合物制成的聚氨酯显示出冷结晶和软段的重要结晶度以及较高的存储模量,但少量聚碳酸酯软段的插层干扰了聚酯软段之间的相互作用,因此在 20 °C 时显示出自愈合。聚氨酯的自愈合归因于聚碳酸酯软段本身以及与聚酯软段之间的物理相互作用,其次是聚合物链的流动性。最后,使用 40 wt.% 或更多聚酯多元醇制成的 PU 显示出了可接受的机械性能。
Polyurethanes Synthesized with Blends of Polyester and Polycarbonate Polyols-New Evidence Supporting the Dynamic Non-Covalent Exchange Mechanism of Intrinsic Self-Healing at 20 °C.
Polyurethanes (PUs) synthesized with blends of polycarbonate and polyester polyols (CD+PEs) showed intrinsic self-healing at 20 °C. The decrease in the polycarbonate soft segments content increased the self-healing time and reduced the kinetics of self-healing of the PUs. The percentage of C-O species decreased and the ones of C-N and C=O species increased by increasing the polyester soft segments in the PUs, due to higher micro-phase separation. All PUs synthetized with CD+PE blends exhibited free carbonate species and interactions between the polycarbonate and polyester soft segments to a somewhat similar extent in all PUs. By increasing the polyester soft segments content, the storage moduli of the PUs decreased and the tan delta values increased, which resulted in favored polycarbonate soft segments interactions, and this was related to slower kinetics of self-healing at 20 °C. Although the PU made with a mixture of 20 wt.% CD and 80 wt.% PE showed cold crystallization and important crystallinity of the soft segments, as well as high storage moduli, the intercalation of a small amount of polycarbonate soft segments disturbed the interactions between the polyester soft segments, so it exhibited self-healing at 20 °C. The self-healing of the PUs was attributed to the physical interactions between polycarbonate soft segments themselves and with polyester soft segments, and, to a minor extent, to the mobility of the polymeric chains. Finally, the PUs made with 40 wt.% or more polyester polyol showed acceptable mechanical properties.
期刊介绍:
Polymers (ISSN 2073-4360) is an international, open access journal of polymer science. It publishes research papers, short communications and review papers. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. Therefore, there is no restriction on the length of the papers. The full experimental details must be provided so that the results can be reproduced. Polymers provides an interdisciplinary forum for publishing papers which advance the fields of (i) polymerization methods, (ii) theory, simulation, and modeling, (iii) understanding of new physical phenomena, (iv) advances in characterization techniques, and (v) harnessing of self-assembly and biological strategies for producing complex multifunctional structures.