An advanced closed-loop geothermal system to substantially enhance heat production

Heat production through conventional closed-loop geothermal systems is constrained by the limited contact area for heat exchange between rock formations and the wellbore. To address this challenge, an advanced closed-loop geothermal system (ACGS) is proposed to enhance heat production in this research. The ACGS incorporates a hydraulic fracture, partitioned by a horizontal insulator for vertical zonal isolation of fluid flow in the fracture, into the closed-loop system’s fluid circulation. To assess heat production from the ACGS, a three-dimensional ACGS numerical model is established and validated, utilized to simulate heat production through the ACGS under conditions of different fracture dimensions and structures, tubing materials, and fluid heat capacities. Performances of complicated fracture structures, including a branched fracture and a multiple-wing fracture, in improving heat production are evaluated. It is found that due to the incorporation of a double-wing fracture, the cumulative extracted heat of a closed-loop system over 20 years is enhanced by 162.94 %. Increasing fracture half-length and fracture height both enhances the heat production of the ACGS considerably. Polyurethane foam proves an excellent tubing material for the ACGS due to its low cost and outstanding adiabatic functionality. Compared with a multiple-wing fracture, a branched fracture results in better heat production through the ACGS, with more fracture branches leading to higher heat production. A branched fracture can improve the cumulative extracted heat from a closed-loop system over 20 years by 321.77 %, and increasing the inter-branch angle further enhances heat production. Working fluid with smaller heat capacity yields considerably higher outlet temperature.