Degradation mechanism for epoxy resins under combined electric, thermal and compressive stresses

Epoxy resins are widely used in equipment such as ultra-high voltage dry-type bushings, which are subjected to severe electric, thermal, and compressive stresses. Some physical mechanisms have already been proposed to explain the degradations generated by these different stresses, however their effects have not yet been quantified.. The degradation characteristics of epoxy resin under combined stresses of 8 kV/mm, 40 °C-120 °C, and 0–60 MPa were investigated in experiments. The results showed that the degradation characteristics turned significantly with the increase of compressive stress. With the increase in compressive stress, initially the partial discharge initiation voltage, tree initiation voltage and time to breakdown increased, and fractal dimension decreased. While the compressive stress exceeded the turning point, the characteristics were reversed. It can be suggested that opposing mechanisms exist. The free volume and phase field theories dominate at lower and higher stresses, respectively. A novel degradation model of the epoxy resin was proposed based on the theories above. When the compressive stress was low, the reduction of free volume played a dominant role in slowing down the degradation. When the compressive stress was high, the partial energy density concentration accelerated the degradation and played a dominant role. The molecular dynamics and finite element simulation of degradation process stress was carried out and proved consistent with experiments. It confirmed the proposed degradation model reliable and valid.