Xinle Lang , Zhenguo Hu , Min Li , Kai Tang , Juan Li , Faming Luo , Zhiguo Xu , Ruishi Mao , Chuan Huang , Jiali Fu , Zulong Zhao , Guoqing Xiao
{"title":"超高剂量率电离室（FLASH）的剂量饱和效应研究和修正计算方法","authors":"Xinle Lang , Zhenguo Hu , Min Li , Kai Tang , Juan Li , Faming Luo , Zhiguo Xu , Ruishi Mao , Chuan Huang , Jiali Fu , Zulong Zhao , Guoqing Xiao","doi":"10.1016/j.radphyschem.2024.112344","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><div>and Purpose: FLASH radiotherapy has aroused strong interest among researchers, but how to monitor dose in real time and lack of generally accepted ion correction model are one of the challenges. This study is based on previous research work, the dosimetric verification of FLASH ionization chamber was performed using a 200 keV electron beam irradiation platform at an ultra-high dose rate. At the same time, the finite element program is written to analyze and calculate the ion correction factor. In addition, the results are compared with the calculation results of Boag model.</div></div><div><h3>Methods</h3><div>In this study, the pressure of the sensitive volume in the detector was adjusted to 16 mbar for the purpose of dosimetry of dose rates in excess of 100 Gy/s. In order to monitor the response of the detector, the beam frequency and pulse width were adjusted accordingly. However, due to the saturation effect of the ionization chamber, the processes of electron ion pair drift, attachment, recombination and diffusion in the sensitive volume were modelled on the basis of the relevant physical principles. Finally, the correction factor was calculated by the finite element analysis.</div></div><div><h3>Results</h3><div>The experimental results demonstrate that the FLASH ionization chamber is capable of meeting the requirements of dose measurement and beam monitoring of the electron beam at ultra-high dose rates. Furthermore, the analytical model is able to more accurately describe the saturation effect and calculate the correction factor.</div></div><div><h3>Conclusion</h3><div>In this paper, the method of reducing air pressure is employed for the purpose of monitoring the dose of ultra-high dose rate. Simultaneously, the finite element method was employed to analyze the physical process of electron–ion pairs within the chamber and to calculate the ion correction factor analytically. A comparison with the Boag model indicates that the proposed approach is effective. However, the results exhibit a certain degree of divergence from experimental outcomes. This discrepancy may be attributed to the influence of the input parameters, which require further calibration to enhance the accuracy and the robustness of the model.</div></div>","PeriodicalId":20861,"journal":{"name":"Radiation Physics and Chemistry","volume":"226 ","pages":"Article 112344"},"PeriodicalIF":2.8000,"publicationDate":"2024-10-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Dosimetric saturation effect study and correction calculation method of ionization chamber at ultra-high dose rate (FLASH)\",\"authors\":\"Xinle Lang , Zhenguo Hu , Min Li , Kai Tang , Juan Li , Faming Luo , Zhiguo Xu , Ruishi Mao , Chuan Huang , Jiali Fu , Zulong Zhao , Guoqing Xiao\",\"doi\":\"10.1016/j.radphyschem.2024.112344\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Background</h3><div>and Purpose: FLASH radiotherapy has aroused strong interest among researchers, but how to monitor dose in real time and lack of generally accepted ion correction model are one of the challenges. This study is based on previous research work, the dosimetric verification of FLASH ionization chamber was performed using a 200 keV electron beam irradiation platform at an ultra-high dose rate. At the same time, the finite element program is written to analyze and calculate the ion correction factor. In addition, the results are compared with the calculation results of Boag model.</div></div><div><h3>Methods</h3><div>In this study, the pressure of the sensitive volume in the detector was adjusted to 16 mbar for the purpose of dosimetry of dose rates in excess of 100 Gy/s. In order to monitor the response of the detector, the beam frequency and pulse width were adjusted accordingly. However, due to the saturation effect of the ionization chamber, the processes of electron ion pair drift, attachment, recombination and diffusion in the sensitive volume were modelled on the basis of the relevant physical principles. Finally, the correction factor was calculated by the finite element analysis.</div></div><div><h3>Results</h3><div>The experimental results demonstrate that the FLASH ionization chamber is capable of meeting the requirements of dose measurement and beam monitoring of the electron beam at ultra-high dose rates. Furthermore, the analytical model is able to more accurately describe the saturation effect and calculate the correction factor.</div></div><div><h3>Conclusion</h3><div>In this paper, the method of reducing air pressure is employed for the purpose of monitoring the dose of ultra-high dose rate. Simultaneously, the finite element method was employed to analyze the physical process of electron–ion pairs within the chamber and to calculate the ion correction factor analytically. A comparison with the Boag model indicates that the proposed approach is effective. However, the results exhibit a certain degree of divergence from experimental outcomes. This discrepancy may be attributed to the influence of the input parameters, which require further calibration to enhance the accuracy and the robustness of the model.</div></div>\",\"PeriodicalId\":20861,\"journal\":{\"name\":\"Radiation Physics and Chemistry\",\"volume\":\"226 \",\"pages\":\"Article 112344\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2024-10-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Radiation Physics and Chemistry\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0969806X24008363\",\"RegionNum\":3,\"RegionCategory\":\"物理与天体物理\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Radiation Physics and Chemistry","FirstCategoryId":"92","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0969806X24008363","RegionNum":3,"RegionCategory":"物理与天体物理","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
Dosimetric saturation effect study and correction calculation method of ionization chamber at ultra-high dose rate (FLASH)
Background
and Purpose: FLASH radiotherapy has aroused strong interest among researchers, but how to monitor dose in real time and lack of generally accepted ion correction model are one of the challenges. This study is based on previous research work, the dosimetric verification of FLASH ionization chamber was performed using a 200 keV electron beam irradiation platform at an ultra-high dose rate. At the same time, the finite element program is written to analyze and calculate the ion correction factor. In addition, the results are compared with the calculation results of Boag model.
Methods
In this study, the pressure of the sensitive volume in the detector was adjusted to 16 mbar for the purpose of dosimetry of dose rates in excess of 100 Gy/s. In order to monitor the response of the detector, the beam frequency and pulse width were adjusted accordingly. However, due to the saturation effect of the ionization chamber, the processes of electron ion pair drift, attachment, recombination and diffusion in the sensitive volume were modelled on the basis of the relevant physical principles. Finally, the correction factor was calculated by the finite element analysis.
Results
The experimental results demonstrate that the FLASH ionization chamber is capable of meeting the requirements of dose measurement and beam monitoring of the electron beam at ultra-high dose rates. Furthermore, the analytical model is able to more accurately describe the saturation effect and calculate the correction factor.
Conclusion
In this paper, the method of reducing air pressure is employed for the purpose of monitoring the dose of ultra-high dose rate. Simultaneously, the finite element method was employed to analyze the physical process of electron–ion pairs within the chamber and to calculate the ion correction factor analytically. A comparison with the Boag model indicates that the proposed approach is effective. However, the results exhibit a certain degree of divergence from experimental outcomes. This discrepancy may be attributed to the influence of the input parameters, which require further calibration to enhance the accuracy and the robustness of the model.
期刊介绍：
Radiation Physics and Chemistry is a multidisciplinary journal that provides a medium for publication of substantial and original papers, reviews, and short communications which focus on research and developments involving ionizing radiation in radiation physics, radiation chemistry and radiation processing.
The journal aims to publish papers with significance to an international audience, containing substantial novelty and scientific impact. The Editors reserve the rights to reject, with or without external review, papers that do not meet these criteria. This could include papers that are very similar to previous publications, only with changed target substrates, employed materials, analyzed sites and experimental methods, report results without presenting new insights and/or hypothesis testing, or do not focus on the radiation effects.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
