Development of 3D-Printed Two-Compartment Capsular Devices for Pulsatile Release of Peptide and Permeation Enhancer.

Objective: The oral absorption of a peptide is driven by a high local concentration of a permeation enhancer (PE) in the gastrointestinal tract. We hypothesized that a controlled release of both PE and peptide from a solid formulation, capable of maintaining an effective co-localized concentration of PE and peptide could enhance oral peptide absorption. In this study, we aimed to develop a 3D-printed two-compartment capsular device with controlled pulsatile release of peptide and sodium caprate (C10).

Methods: 3D-printed two-compartment capsular device was fabricated using a fused deposition modeling method. This device was then filled with LY peptide and C10. The release profile was modulated by changing the thickness and polymer type of the capsular device. USP apparatus II dissolution test was used to evaluate the impacts of device thickness and polymer selection on release profile in vitro. An optimal device was then enteric coated with HPMCAS.

Results: A strong linear relationship between the thickness of capsular devices and the delay in the release onset time was observed. An increase in the device thickness or the use of PLA decreased the release rate. The capsular device with compartment 1, compartment 2 and fence thickness of 0.4; 0.95 and 0.5 mm, respectively, and the use of PVA achieved desired pulsatile release profiles of both peptide and C10. Furthermore, enteric-coated capsular devices with HPMCAS had similar pulsatile release profiles compared to non-enteric coated devices.

Conclusion: These findings suggest potential application of 3D-printing techniques in the formulation development for complex modified drug release products.