{"title":"聚乙烯亚胺/聚乙烯磺酸聚电解质复合物纳米颗粒在聚丙烯酰胺/聚乙烯亚胺凝胶体系中的延迟释放和减少吸附性能","authors":"","doi":"10.1016/j.molliq.2024.126393","DOIUrl":null,"url":null,"abstract":"<div><div>Polyacrylamide/Polyethyleneimine (HPAM/PEI) is an environmentally friendly and promising gel system. However, inadequate gelation time and retention of the cross-linker (polyethyleneimine, PEI) during migration pose significant challenges for effective water control treatment in deep reservoirs. Polyelectrolyte complex nanoparticles (PECs) have demonstrated the ability to efficiently encapsulate PEI, facilitating for its gradual release. To achieve this, a cost-effective polyanionic complex, poly(vinyl sulfonate) (PVS), was employed to form PECs with PEI. By adjusting the mixing ratio of PEI and PVS, stable PECs suspensions with varying charges were successfully produced. These stable PECs exhibited spherical shapes with a particle size distribution ranging from 127.3–442.71 nm, and an average particle size of approximately 200 nm. The encapsulation efficiency of PEI by PECs varied from 64.56 % to 86.14 %. Under different conditions, 55.12 % to 90.26 % of PEI could be released from PECs. Increased temperatures, higher ionic strengths, and greater deviations in pH from the initial state of the PECs suspension all facilitated the release of PEI. The most stable PECs delayed the gelation time of the HPAM/PEI system to 9.5 days, which is twice the base gelation time of 4.5 days. The strength of mature HPAM/PEI (PECs) gels increased by 8.95 Pa in storage modulus (G′) compared to HPAM/PEI at the same concentration, albeit with a reduced linear viscoelastic region. And, the PECs-based delayed crosslinking method does not negatively affect the mechanical strength of the HPAM/PEI gel system, and thus its water control ability, under reservoir conditions. On the other hand, the static adsorption of PEI encapsulated by anionic PECs on sand decreased to one-fourth of that of free PEI (PEI solution). Additionally, the breakthrough of PEI encapsulated in anionic PECs in fractured sandstone cores was significantly advanced compared to free PEI.</div></div>","PeriodicalId":371,"journal":{"name":"Journal of Molecular Liquids","volume":null,"pages":null},"PeriodicalIF":5.3000,"publicationDate":"2024-10-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Performance of delaying release and reducing adsorption of polyethyleneimine/poly(vinyl sulfonate) polyelectrolyte complex nanoparticles in polyacrylamide/polyethyleneimine gel system\",\"authors\":\"\",\"doi\":\"10.1016/j.molliq.2024.126393\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Polyacrylamide/Polyethyleneimine (HPAM/PEI) is an environmentally friendly and promising gel system. However, inadequate gelation time and retention of the cross-linker (polyethyleneimine, PEI) during migration pose significant challenges for effective water control treatment in deep reservoirs. Polyelectrolyte complex nanoparticles (PECs) have demonstrated the ability to efficiently encapsulate PEI, facilitating for its gradual release. To achieve this, a cost-effective polyanionic complex, poly(vinyl sulfonate) (PVS), was employed to form PECs with PEI. By adjusting the mixing ratio of PEI and PVS, stable PECs suspensions with varying charges were successfully produced. These stable PECs exhibited spherical shapes with a particle size distribution ranging from 127.3–442.71 nm, and an average particle size of approximately 200 nm. The encapsulation efficiency of PEI by PECs varied from 64.56 % to 86.14 %. Under different conditions, 55.12 % to 90.26 % of PEI could be released from PECs. Increased temperatures, higher ionic strengths, and greater deviations in pH from the initial state of the PECs suspension all facilitated the release of PEI. The most stable PECs delayed the gelation time of the HPAM/PEI system to 9.5 days, which is twice the base gelation time of 4.5 days. The strength of mature HPAM/PEI (PECs) gels increased by 8.95 Pa in storage modulus (G′) compared to HPAM/PEI at the same concentration, albeit with a reduced linear viscoelastic region. And, the PECs-based delayed crosslinking method does not negatively affect the mechanical strength of the HPAM/PEI gel system, and thus its water control ability, under reservoir conditions. On the other hand, the static adsorption of PEI encapsulated by anionic PECs on sand decreased to one-fourth of that of free PEI (PEI solution). Additionally, the breakthrough of PEI encapsulated in anionic PECs in fractured sandstone cores was significantly advanced compared to free PEI.</div></div>\",\"PeriodicalId\":371,\"journal\":{\"name\":\"Journal of Molecular Liquids\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.3000,\"publicationDate\":\"2024-10-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Molecular Liquids\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0167732224024528\",\"RegionNum\":2,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Molecular Liquids","FirstCategoryId":"92","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0167732224024528","RegionNum":2,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
Performance of delaying release and reducing adsorption of polyethyleneimine/poly(vinyl sulfonate) polyelectrolyte complex nanoparticles in polyacrylamide/polyethyleneimine gel system
Polyacrylamide/Polyethyleneimine (HPAM/PEI) is an environmentally friendly and promising gel system. However, inadequate gelation time and retention of the cross-linker (polyethyleneimine, PEI) during migration pose significant challenges for effective water control treatment in deep reservoirs. Polyelectrolyte complex nanoparticles (PECs) have demonstrated the ability to efficiently encapsulate PEI, facilitating for its gradual release. To achieve this, a cost-effective polyanionic complex, poly(vinyl sulfonate) (PVS), was employed to form PECs with PEI. By adjusting the mixing ratio of PEI and PVS, stable PECs suspensions with varying charges were successfully produced. These stable PECs exhibited spherical shapes with a particle size distribution ranging from 127.3–442.71 nm, and an average particle size of approximately 200 nm. The encapsulation efficiency of PEI by PECs varied from 64.56 % to 86.14 %. Under different conditions, 55.12 % to 90.26 % of PEI could be released from PECs. Increased temperatures, higher ionic strengths, and greater deviations in pH from the initial state of the PECs suspension all facilitated the release of PEI. The most stable PECs delayed the gelation time of the HPAM/PEI system to 9.5 days, which is twice the base gelation time of 4.5 days. The strength of mature HPAM/PEI (PECs) gels increased by 8.95 Pa in storage modulus (G′) compared to HPAM/PEI at the same concentration, albeit with a reduced linear viscoelastic region. And, the PECs-based delayed crosslinking method does not negatively affect the mechanical strength of the HPAM/PEI gel system, and thus its water control ability, under reservoir conditions. On the other hand, the static adsorption of PEI encapsulated by anionic PECs on sand decreased to one-fourth of that of free PEI (PEI solution). Additionally, the breakthrough of PEI encapsulated in anionic PECs in fractured sandstone cores was significantly advanced compared to free PEI.
期刊介绍:
The journal includes papers in the following areas:
– Simple organic liquids and mixtures
– Ionic liquids
– Surfactant solutions (including micelles and vesicles) and liquid interfaces
– Colloidal solutions and nanoparticles
– Thermotropic and lyotropic liquid crystals
– Ferrofluids
– Water, aqueous solutions and other hydrogen-bonded liquids
– Lubricants, polymer solutions and melts
– Molten metals and salts
– Phase transitions and critical phenomena in liquids and confined fluids
– Self assembly in complex liquids.– Biomolecules in solution
The emphasis is on the molecular (or microscopic) understanding of particular liquids or liquid systems, especially concerning structure, dynamics and intermolecular forces. The experimental techniques used may include:
– Conventional spectroscopy (mid-IR and far-IR, Raman, NMR, etc.)
– Non-linear optics and time resolved spectroscopy (psec, fsec, asec, ISRS, etc.)
– Light scattering (Rayleigh, Brillouin, PCS, etc.)
– Dielectric relaxation
– X-ray and neutron scattering and diffraction.
Experimental studies, computer simulations (MD or MC) and analytical theory will be considered for publication; papers just reporting experimental results that do not contribute to the understanding of the fundamentals of molecular and ionic liquids will not be accepted. Only papers of a non-routine nature and advancing the field will be considered for publication.