利用 3D PTV 测量的颗粒速度验证滚筒式搅拌磨机的 DEM 模拟

IF 4.2 2区 工程技术 Q2 ENGINEERING, CHEMICAL Advanced Powder Technology Pub Date : 2024-11-04 DOI:10.1016/j.apt.2024.104693
{"title":"利用 3D PTV 测量的颗粒速度验证滚筒式搅拌磨机的 DEM 模拟","authors":"","doi":"10.1016/j.apt.2024.104693","DOIUrl":null,"url":null,"abstract":"<div><div>We found that the impact energy calculated by discrete element method (DEM) simulation can be used to explain the liberation of materials from electronic scrap (e-scrap) in a previous study; however, the absolute value of the impact energy had not been validated. Thus, we attempted to confirm the reliability by considering the particle velocity, which is highly related to impact energy. The comminution experiment was conducted using a drum-type agitation mill, and the particle velocity was measured by 3D particle tracking velocimetry (PTV) based on moving body analysis. The particle velocities for both the DEM simulation and PTV were compared for two types of particles, a non-breakable steel component and a connecting component that represents a breakable form of e-scrap. As a result, the particle velocities obtained from the two methods were within a relative error of 10% for the steel component, and thus the reliability of the impact energy was indirectly confirmed. In contrast, for the connecting component, the particle velocity from the DEM simulations was more than 50% higher, suggesting the influence of fracture energy. By calibrating the DEM simulation based on the particle velocity from PTV, the energy efficiency of fracture was estimated to be approximately 60%.</div></div>","PeriodicalId":7232,"journal":{"name":"Advanced Powder Technology","volume":null,"pages":null},"PeriodicalIF":4.2000,"publicationDate":"2024-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Validation of DEM simulations for a drum-type agitation mill using particle velocities measured by 3D PTV\",\"authors\":\"\",\"doi\":\"10.1016/j.apt.2024.104693\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>We found that the impact energy calculated by discrete element method (DEM) simulation can be used to explain the liberation of materials from electronic scrap (e-scrap) in a previous study; however, the absolute value of the impact energy had not been validated. Thus, we attempted to confirm the reliability by considering the particle velocity, which is highly related to impact energy. The comminution experiment was conducted using a drum-type agitation mill, and the particle velocity was measured by 3D particle tracking velocimetry (PTV) based on moving body analysis. The particle velocities for both the DEM simulation and PTV were compared for two types of particles, a non-breakable steel component and a connecting component that represents a breakable form of e-scrap. As a result, the particle velocities obtained from the two methods were within a relative error of 10% for the steel component, and thus the reliability of the impact energy was indirectly confirmed. In contrast, for the connecting component, the particle velocity from the DEM simulations was more than 50% higher, suggesting the influence of fracture energy. By calibrating the DEM simulation based on the particle velocity from PTV, the energy efficiency of fracture was estimated to be approximately 60%.</div></div>\",\"PeriodicalId\":7232,\"journal\":{\"name\":\"Advanced Powder Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.2000,\"publicationDate\":\"2024-11-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advanced Powder Technology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0921883124003698\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advanced Powder Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0921883124003698","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

摘要

我们在之前的研究中发现,离散元素法(DEM)模拟计算出的冲击能量可以用来解释电子废料(e-scrap)中材料的释放;但是,冲击能量的绝对值尚未得到验证。因此,我们尝试通过考虑与冲击能量高度相关的颗粒速度来确认其可靠性。粉碎实验是使用鼓式搅拌磨进行的,颗粒速度是通过基于移动体分析的三维颗粒跟踪测速仪(PTV)测量的。DEM 模拟和 PTV 的颗粒速度针对两种类型的颗粒进行了比较,一种是不可破碎的钢部件,另一种是代表电子废料可破碎形式的连接部件。结果显示,对于钢制部件,两种方法得出的颗粒速度相对误差在 10%以内,从而间接证实了冲击能量的可靠性。相反,对于连接部件,DEM 模拟得出的颗粒速度要高出 50%以上,这表明断裂能量的影响。根据 PTV 的颗粒速度对 DEM 模拟进行校准,估计断裂能量效率约为 60%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Validation of DEM simulations for a drum-type agitation mill using particle velocities measured by 3D PTV
We found that the impact energy calculated by discrete element method (DEM) simulation can be used to explain the liberation of materials from electronic scrap (e-scrap) in a previous study; however, the absolute value of the impact energy had not been validated. Thus, we attempted to confirm the reliability by considering the particle velocity, which is highly related to impact energy. The comminution experiment was conducted using a drum-type agitation mill, and the particle velocity was measured by 3D particle tracking velocimetry (PTV) based on moving body analysis. The particle velocities for both the DEM simulation and PTV were compared for two types of particles, a non-breakable steel component and a connecting component that represents a breakable form of e-scrap. As a result, the particle velocities obtained from the two methods were within a relative error of 10% for the steel component, and thus the reliability of the impact energy was indirectly confirmed. In contrast, for the connecting component, the particle velocity from the DEM simulations was more than 50% higher, suggesting the influence of fracture energy. By calibrating the DEM simulation based on the particle velocity from PTV, the energy efficiency of fracture was estimated to be approximately 60%.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Advanced Powder Technology
Advanced Powder Technology 工程技术-工程:化工
CiteScore
9.50
自引率
7.70%
发文量
424
审稿时长
55 days
期刊介绍: The aim of Advanced Powder Technology is to meet the demand for an international journal that integrates all aspects of science and technology research on powder and particulate materials. The journal fulfills this purpose by publishing original research papers, rapid communications, reviews, and translated articles by prominent researchers worldwide. The editorial work of Advanced Powder Technology, which was founded as the International Journal of the Society of Powder Technology, Japan, is now shared by distinguished board members, who operate in a unique framework designed to respond to the increasing global demand for articles on not only powder and particles, but also on various materials produced from them. Advanced Powder Technology covers various areas, but a discussion of powder and particles is required in articles. Topics include: Production of powder and particulate materials in gases and liquids(nanoparticles, fine ceramics, pharmaceuticals, novel functional materials, etc.); Aerosol and colloidal processing; Powder and particle characterization; Dynamics and phenomena; Calculation and simulation (CFD, DEM, Monte Carlo method, population balance, etc.); Measurement and control of powder processes; Particle modification; Comminution; Powder handling and operations (storage, transport, granulation, separation, fluidization, etc.)
期刊最新文献
Validation of DEM simulations for a drum-type agitation mill using particle velocities measured by 3D PTV Reactive molecular dynamics analysis of alumina nano-powders under warm compaction process Viscosity control of alumina dispersed resin through design of surface modifier by a QSPR-method Behavior of tunable ZnO quantum dots (QDs) stabilized by surfactant-free silica nanofluids in their visible luminescence spectra Effect of calcination temperature on the structural, microstructure, and electrical properties of CeO2 nanoparticles as a solid electrolyte for IT-SOFC application
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1