LiFi for Industry 4.0: Main Features, Implementation and Initial Testing of IEEE Std 802.15.13

As industrial communication continues to evolve to increase flexibility through wireless communication, networked optical wireless communication (OWC), also known as LiFi, has emerged as a promising candidate technology due to its unlicensed spectrum and relatively deterministic propagation. The inherent containment of light improves security, enables dense cellular networks with spatial reuse, and results in reduced sporadic interference while providing high-capacity short range communication links to mobile end devices. This paper outlines the features of the new IEEE Std 802.15.13-2013, suitable for industrial OWC, and presents details of our prototype implementation along with initial experiments. The standard specifies deterministic medium access control (MAC), based on dynamic time division multiple access (TDMA), as well as two physical layers (PHYs) for extended range and robustness, and for spectral efficiency, respectively. Our prototype includes a central coordinator, implemented entirely in software, running on commodity server hardware. It connects to distributed ceiling-mounted optical wireless frontends via a packet-switched network (Ethernet) and is capable of forming them into adaptive virtual cells on a per-user basis. This approach enhances reliability through multiple-input multiple-output (MIMO) transmission and allows for smooth mobility. We implemented the Pulsed Modulation PHY (PM-PHY) on a commercially available field programmable gate array (FPGA) evaluation board. Initial test results indicate that the PM-PHY supports typical distances of up to 6 m between the ceiling and the mobile device. The MAC achieves deterministic latency values below 4 ms.