Modular hydrogel selectively adsorbs phosphates and hexavalent chromium while enabling phosphate recovery

Electroplating wastewater containing high concentrations of phosphates and hexavalent chromium Cr(VI) poses serious environmental pollution. Moreover, phosphorus, as a non-renewable resource, necessitates its recovery to meet sustainable development goals. To address this issue, this study used sodium alginate as the scaffold module, synthesized lanthanum carbonate in situ within a chitosan module to serve as the phosphate adsorption module, and employed polyethyleneimine (PEI) modules to enhance the adsorption capacity for Cr(VI), successfully fabricating a modular hydrogel (LC-CSP). LC-CSP exhibits a complex porous structure and surface morphology, forming an ultra-low-density fiber network with good strength and elasticity, ensuring uniform distribution and exposure of active sites. Under optimal conditions for single-component adsorption, LC-CSP achieved adsorption capacities of 232.02 mg/g for phosphates and 474.61 mg/g for Cr(VI). Additionally, LC-CSP demonstrated excellent reusability, retaining over 83 % of its performance after five cycles. In simulated electroplating wastewater experiments with various interfering substances, LC-CSP maintained high removal efficiencies (>90.72 %) for phosphates and Cr(VI). Post-experiment, enriched water after phosphate desorption was further treated to recover phosphorus resources in complex water environments. Multiple characterization techniques elucidated the adsorption mechanisms of LC-CSP: phosphate adsorption primarily involved ligand exchange, electrostatic interactions, and hydrogen bonding, while Cr(VI) adsorption included electrostatic interactions, hydrogen bonding, and reduction reactions. Finally, fixed-bed simulated wastewater adsorption experiments validated the technical potential of LC-CSP for practical electroplating wastewater management.