Impact of dual-fracture location on heat extraction from Enhanced geothermal system in low-permeability reservoirs

As environmental and economic issues exacerbated by traditional fossil fuels intensify, Dry Hot Rock geothermal energy has garnered significant attention due to its immense potential. Current research predominantly focuses on the heat extraction effectiveness in complex fractures within Enhanced Geothermal Systems, with relatively less emphasis on fluid behavior between large fractures. This study employs finite element software to establish a multi-horizontal well model in a low permeability reservoir (5 × 10^-17 m²), analyzing the impact of different spatial configurations of two fractures on fluid flow, heat transfer, and heat extraction efficiency. The results indicate that fractures are the primary channels for fluid flow in low permeability reservoirs. Optimal heat extraction occurs when fractures are parallel, spaced 100 m apart, and perpendicular to the horizontal well, with significant threshold effects of fracture spacing and angle on temperature distribution. The highest heat extraction is achieved at a 37° intersection angle of fractures at the production well. Over a 60-year production period, reservoir extraction degrees for parallel or intersecting fractures range from 8 % to 15 %, while that for fracture communication between injection and production well horizontal segments is only 1.91 % to 3.01 %. Under the optimal injection scenario, cumulative 60-year heat production for parallel, intersecting, and communicating fractures is 2.13 × 10¹⁸J, 2.20 × 10¹⁸J, and 2.22 × 10¹⁸J, respectively, with the best heat extraction efficiency when fractures communicate. Additionally, under constant flow rate and inlet temperature, outlet temperature and system thermal power show near-linear declines, while reservoir extraction degree rises linearly. This study provides crucial theoretical support and practical guidance for the efficient extraction of geothermal energy.