Pengfei Hu , Tianbo Hou , Weifei Gu , Jie Wan , Qi Li
{"title":"考虑汽轮机凝结冲击效应的湿蒸汽非平衡凝结流动特性","authors":"Pengfei Hu , Tianbo Hou , Weifei Gu , Jie Wan , Qi Li","doi":"10.1016/j.applthermaleng.2024.124828","DOIUrl":null,"url":null,"abstract":"<div><div>A non-equilibrium condensation flow occurs in steam turbines, accompanied by condensation shock. At present, there are limited studies on the influence of condensation shock on the flow and condensation characteristics of wet steam, and the unsteady influence of condensation shock on the flow field of wet steam always have been ignored. In this paper, the unsteady flow characteristics of condensation were presented by considering the condensation shock effect. First, the condensation flow models and corresponding source terms were programmed and loaded with UDS (user-defined scalar) and UDF (user-defined function), respectively, and the governing equations were discretized using a high-resolution calculation method. The calculated results agreed well with the reported experimental results. Based on the models, the non-equilibrium condensation flow characteristics with inlet and outlet pressures in Laval nozzle considering the condensation shock effect were analyzed. Finally, during the unsteady phase change process, the effects of back pressure and saturation of the inlet on the liquid phase parameters were examined considering the condensation shock effect in the Dykas cascade. The results show that a decrease in the back pressure and an increase in the inlet pressure improve the condensation shock intensity in Laval nozzle. With the increase of condensation shock intensity, the nucleation rate increases. Moreover, in Dykas cascade, with the increase of back pressure from 48.8 kPa to 73.2 kPa, the maximum wetness decreases from 4.8 % to 2.1 %, whereas with the increase of relative saturation from 0.58 to 0.88, the maximum wetness increases from 2.4 % to 3.6 %. The results obtained in this paper are of significance to accurately analyze the actual situation of non-equilibrium condensation flow of wet steam and to develop methods for reducing wet steam loss in turbine stage.</div></div>","PeriodicalId":8201,"journal":{"name":"Applied Thermal Engineering","volume":"259 ","pages":"Article 124828"},"PeriodicalIF":6.1000,"publicationDate":"2024-11-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Non-equilibrium condensation flow characteristics of wet steam considering condensation shock effect in the steam turbine\",\"authors\":\"Pengfei Hu , Tianbo Hou , Weifei Gu , Jie Wan , Qi Li\",\"doi\":\"10.1016/j.applthermaleng.2024.124828\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>A non-equilibrium condensation flow occurs in steam turbines, accompanied by condensation shock. At present, there are limited studies on the influence of condensation shock on the flow and condensation characteristics of wet steam, and the unsteady influence of condensation shock on the flow field of wet steam always have been ignored. In this paper, the unsteady flow characteristics of condensation were presented by considering the condensation shock effect. First, the condensation flow models and corresponding source terms were programmed and loaded with UDS (user-defined scalar) and UDF (user-defined function), respectively, and the governing equations were discretized using a high-resolution calculation method. The calculated results agreed well with the reported experimental results. Based on the models, the non-equilibrium condensation flow characteristics with inlet and outlet pressures in Laval nozzle considering the condensation shock effect were analyzed. Finally, during the unsteady phase change process, the effects of back pressure and saturation of the inlet on the liquid phase parameters were examined considering the condensation shock effect in the Dykas cascade. The results show that a decrease in the back pressure and an increase in the inlet pressure improve the condensation shock intensity in Laval nozzle. With the increase of condensation shock intensity, the nucleation rate increases. Moreover, in Dykas cascade, with the increase of back pressure from 48.8 kPa to 73.2 kPa, the maximum wetness decreases from 4.8 % to 2.1 %, whereas with the increase of relative saturation from 0.58 to 0.88, the maximum wetness increases from 2.4 % to 3.6 %. The results obtained in this paper are of significance to accurately analyze the actual situation of non-equilibrium condensation flow of wet steam and to develop methods for reducing wet steam loss in turbine stage.</div></div>\",\"PeriodicalId\":8201,\"journal\":{\"name\":\"Applied Thermal Engineering\",\"volume\":\"259 \",\"pages\":\"Article 124828\"},\"PeriodicalIF\":6.1000,\"publicationDate\":\"2024-11-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Thermal Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1359431124024967\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Thermal Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1359431124024967","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
Non-equilibrium condensation flow characteristics of wet steam considering condensation shock effect in the steam turbine
A non-equilibrium condensation flow occurs in steam turbines, accompanied by condensation shock. At present, there are limited studies on the influence of condensation shock on the flow and condensation characteristics of wet steam, and the unsteady influence of condensation shock on the flow field of wet steam always have been ignored. In this paper, the unsteady flow characteristics of condensation were presented by considering the condensation shock effect. First, the condensation flow models and corresponding source terms were programmed and loaded with UDS (user-defined scalar) and UDF (user-defined function), respectively, and the governing equations were discretized using a high-resolution calculation method. The calculated results agreed well with the reported experimental results. Based on the models, the non-equilibrium condensation flow characteristics with inlet and outlet pressures in Laval nozzle considering the condensation shock effect were analyzed. Finally, during the unsteady phase change process, the effects of back pressure and saturation of the inlet on the liquid phase parameters were examined considering the condensation shock effect in the Dykas cascade. The results show that a decrease in the back pressure and an increase in the inlet pressure improve the condensation shock intensity in Laval nozzle. With the increase of condensation shock intensity, the nucleation rate increases. Moreover, in Dykas cascade, with the increase of back pressure from 48.8 kPa to 73.2 kPa, the maximum wetness decreases from 4.8 % to 2.1 %, whereas with the increase of relative saturation from 0.58 to 0.88, the maximum wetness increases from 2.4 % to 3.6 %. The results obtained in this paper are of significance to accurately analyze the actual situation of non-equilibrium condensation flow of wet steam and to develop methods for reducing wet steam loss in turbine stage.
期刊介绍:
Applied Thermal Engineering disseminates novel research related to the design, development and demonstration of components, devices, equipment, technologies and systems involving thermal processes for the production, storage, utilization and conservation of energy, with a focus on engineering application.
The journal publishes high-quality and high-impact Original Research Articles, Review Articles, Short Communications and Letters to the Editor on cutting-edge innovations in research, and recent advances or issues of interest to the thermal engineering community.