印度东南海岸热带河口(Muttukadu Backwater)的微塑料污染:出现、分布特征、潜在来源和生态风险评估

IF 5.4 Q2 ENGINEERING, ENVIRONMENTAL Journal of hazardous materials advances Pub Date : 2024-11-01 DOI:10.1016/j.hazadv.2024.100521
Velmurugan P. M , Krishnan Vijayaprabhakaran , Devika P. T , Anbuselvan N , Venkatesan S , Mohammad Suhail Meer
{"title":"印度东南海岸热带河口(Muttukadu Backwater)的微塑料污染:出现、分布特征、潜在来源和生态风险评估","authors":"Velmurugan P. M ,&nbsp;Krishnan Vijayaprabhakaran ,&nbsp;Devika P. T ,&nbsp;Anbuselvan N ,&nbsp;Venkatesan S ,&nbsp;Mohammad Suhail Meer","doi":"10.1016/j.hazadv.2024.100521","DOIUrl":null,"url":null,"abstract":"<div><div>Around the world, microplastic pollution is pervasive and is regarded as the biggest threat to all ecosystems. We conducted the present study to determine the prevalence of microplastics (MPs), their polymer hazard risk (PHI), and any potential sources of these particles in the estuary of Muttukadu Backwater, Southeast Coast of India. Microplastics were extricated from surface water and sediment by the wet peroxide method, identified by a stereo zoom microscope (SM), and characterized by ATR-FTIR and SEM-EDS analysis. The average microplastic abundance in sediment and surface water was 815±158 particles Kg<sup>−1</sup> and 195±38 particles m<sup>−3</sup>, respectively. The most common microplastics based on shapes were fibers and fragments in both sediment and surface water, with blue and green-colored microplastics being the most frequently observed colors. Type II polymer particles (&lt;3.00 mm–1.00 mm) are dominant particles in sediment (36 %), and type I (5.00 mm–3.00 mm) particles dominate in surface water samples (49 %). Energy dispersive X-ray spectrometer (EDS) results showed that the following chemical elements, such as O, C, Cl, Fe, Na, Al, K, Ca, and Si, as well as the order of the trace metal Pb &gt; Cr &gt; Ni &gt; Co &gt; As &gt; Cu &gt; Cd &gt; Zn, are observed by microplastics of all sediment sampling location. The pollution load index (PI), polymer hazard index (PHI), and potential ecological risk (PER) index models revealed varying level of risk. The polymer hazard index (PHI) reveals that both water and sediments are moderate to highly MP contamination. The hazards of polymers such as polyethylene, polystyrene, polyester, and polyamide significantly contributed to hazard level IV. Inadequate plastic waste management, human habitation and tourism, rapid industrialization, and coastal construction are the main sources of microplastic contamination in the study area. The proper guidelines, potential policies, and technological interventions are much needed to reduce the microplastic contamination along Southeast Coast of India.</div></div>","PeriodicalId":73763,"journal":{"name":"Journal of hazardous materials advances","volume":"16 ","pages":"Article 100521"},"PeriodicalIF":5.4000,"publicationDate":"2024-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Microplastics pollution in tropical estuary (Muttukadu Backwater), Southeast Coast of India: Occurrence, distribution characteristics, potential sources and ecological risk assessment\",\"authors\":\"Velmurugan P. M ,&nbsp;Krishnan Vijayaprabhakaran ,&nbsp;Devika P. T ,&nbsp;Anbuselvan N ,&nbsp;Venkatesan S ,&nbsp;Mohammad Suhail Meer\",\"doi\":\"10.1016/j.hazadv.2024.100521\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Around the world, microplastic pollution is pervasive and is regarded as the biggest threat to all ecosystems. We conducted the present study to determine the prevalence of microplastics (MPs), their polymer hazard risk (PHI), and any potential sources of these particles in the estuary of Muttukadu Backwater, Southeast Coast of India. Microplastics were extricated from surface water and sediment by the wet peroxide method, identified by a stereo zoom microscope (SM), and characterized by ATR-FTIR and SEM-EDS analysis. The average microplastic abundance in sediment and surface water was 815±158 particles Kg<sup>−1</sup> and 195±38 particles m<sup>−3</sup>, respectively. The most common microplastics based on shapes were fibers and fragments in both sediment and surface water, with blue and green-colored microplastics being the most frequently observed colors. Type II polymer particles (&lt;3.00 mm–1.00 mm) are dominant particles in sediment (36 %), and type I (5.00 mm–3.00 mm) particles dominate in surface water samples (49 %). Energy dispersive X-ray spectrometer (EDS) results showed that the following chemical elements, such as O, C, Cl, Fe, Na, Al, K, Ca, and Si, as well as the order of the trace metal Pb &gt; Cr &gt; Ni &gt; Co &gt; As &gt; Cu &gt; Cd &gt; Zn, are observed by microplastics of all sediment sampling location. The pollution load index (PI), polymer hazard index (PHI), and potential ecological risk (PER) index models revealed varying level of risk. The polymer hazard index (PHI) reveals that both water and sediments are moderate to highly MP contamination. The hazards of polymers such as polyethylene, polystyrene, polyester, and polyamide significantly contributed to hazard level IV. Inadequate plastic waste management, human habitation and tourism, rapid industrialization, and coastal construction are the main sources of microplastic contamination in the study area. The proper guidelines, potential policies, and technological interventions are much needed to reduce the microplastic contamination along Southeast Coast of India.</div></div>\",\"PeriodicalId\":73763,\"journal\":{\"name\":\"Journal of hazardous materials advances\",\"volume\":\"16 \",\"pages\":\"Article 100521\"},\"PeriodicalIF\":5.4000,\"publicationDate\":\"2024-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of hazardous materials advances\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2772416624001219\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ENVIRONMENTAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of hazardous materials advances","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2772416624001219","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ENVIRONMENTAL","Score":null,"Total":0}
引用次数: 0

摘要

在世界各地,微塑料污染无处不在,被认为是对所有生态系统的最大威胁。我们进行了本研究,以确定印度东南海岸 Muttukadu Backwater 河口微塑料(MPs)的普遍性、其聚合物危害风险(PHI)以及这些微粒的潜在来源。采用湿过氧化物法从地表水和沉积物中提取微塑料,用立体变焦显微镜(SM)进行识别,并通过 ATR-FTIR 和 SEM-EDS 分析进行表征。沉积物和地表水中微塑料的平均丰度分别为 815±158 粒 Kg-1 和 195±38 粒 m-3。从形状上看,沉积物和地表水中最常见的微塑料是纤维和碎片,最常观察到的微塑料颜色是蓝色和绿色。第二类聚合物颗粒(3.00 毫米-1.00 毫米)是沉积物中的主要颗粒(36%),而第一类颗粒(5.00 毫米-3.00 毫米)则是地表水样本中的主要颗粒(49%)。能量色散 X 射线光谱仪(EDS)结果表明,所有沉积物采样地点的微塑料中均可观察到以下化学元素,如 O、C、Cl、Fe、Na、Al、K、Ca 和 Si,以及痕量金属 Pb > Cr > Ni > Co > As > Cu > Cd > Zn 的排列顺序。污染负荷指数(PI)、聚合物危害指数(PHI)和潜在生态风险指数(PER)模型显示了不同程度的风险。聚合物危害指数(PHI)显示,水和沉积物都受到中度到高度 MP 污染。聚乙烯、聚苯乙烯、聚酯和聚酰胺等聚合物的危害极大地导致了危害等级 IV。塑料废物管理不足、人类居住和旅游、快速工业化和沿海建设是研究区域微塑料污染的主要来源。要减少印度东南沿海的微塑料污染,亟需制定适当的指导方针、潜在的政策和技术干预措施。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Microplastics pollution in tropical estuary (Muttukadu Backwater), Southeast Coast of India: Occurrence, distribution characteristics, potential sources and ecological risk assessment
Around the world, microplastic pollution is pervasive and is regarded as the biggest threat to all ecosystems. We conducted the present study to determine the prevalence of microplastics (MPs), their polymer hazard risk (PHI), and any potential sources of these particles in the estuary of Muttukadu Backwater, Southeast Coast of India. Microplastics were extricated from surface water and sediment by the wet peroxide method, identified by a stereo zoom microscope (SM), and characterized by ATR-FTIR and SEM-EDS analysis. The average microplastic abundance in sediment and surface water was 815±158 particles Kg−1 and 195±38 particles m−3, respectively. The most common microplastics based on shapes were fibers and fragments in both sediment and surface water, with blue and green-colored microplastics being the most frequently observed colors. Type II polymer particles (<3.00 mm–1.00 mm) are dominant particles in sediment (36 %), and type I (5.00 mm–3.00 mm) particles dominate in surface water samples (49 %). Energy dispersive X-ray spectrometer (EDS) results showed that the following chemical elements, such as O, C, Cl, Fe, Na, Al, K, Ca, and Si, as well as the order of the trace metal Pb > Cr > Ni > Co > As > Cu > Cd > Zn, are observed by microplastics of all sediment sampling location. The pollution load index (PI), polymer hazard index (PHI), and potential ecological risk (PER) index models revealed varying level of risk. The polymer hazard index (PHI) reveals that both water and sediments are moderate to highly MP contamination. The hazards of polymers such as polyethylene, polystyrene, polyester, and polyamide significantly contributed to hazard level IV. Inadequate plastic waste management, human habitation and tourism, rapid industrialization, and coastal construction are the main sources of microplastic contamination in the study area. The proper guidelines, potential policies, and technological interventions are much needed to reduce the microplastic contamination along Southeast Coast of India.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of hazardous materials advances
Journal of hazardous materials advances Environmental Engineering
CiteScore
4.80
自引率
0.00%
发文量
0
审稿时长
50 days
期刊最新文献
Levels, sources and toxicity assessment of PCBs in surface and groundwater in Nigeria: A systematic review Degradation of antibiotics by homogeneous and heterogeneous Fenton processes: A review Field versus laboratory measurements of PFAS sorption by soils and sediments Photocatalytic degradation of antibiotics in water via TiO2-x: Research needs for technological advancements Process optimization for silica dissolution from e-waste as a sustainable step towards bioremediation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1