Ratcheting-fatigue behavior and fracture mechanism of 316H ASS under cyclic random loading block

In this study, a set of programmed random factors with non-zero mean were designed. Then various stress levels (15, 18 and 22 KN) were multiple superimposed to factors to form one random loading block (RLB), the blocks were repeated to failure to investigate the synergistic damage of 316H ASS under low-cycle fatigue (LCF), high-cycle fatigue (HCF) and ratcheting effect. The lifetime of cyclic RLB tests decreased with the increase of block-mean stresses ${\sigma }_m^{\mathrm{Block}}$ (208、255 and 311.5 MPa). The normalized strain amplitudes indicate that when the ${\sigma }_m^{\mathrm{Block}}$ amplitude below the yield strength (208 and 255 MPa), a stable ratchet accumulation phase allows the specimens to exhibit cyclic hardening behavior. When ${\sigma }_m^{\mathrm{Block}}$ (311.5 MPa) exceeds the yield strength, the ratcheting strain increases significantly and the specimens exhibit cyclic softening behavior. Especially, the transgranular cleavage fracture, quasi-cleavage fracture and intergranular secondary cracks were identified when the failure of cyclic RLB tests were induced by LCF, HCF and ratcheting. With the increase of ${\sigma }_m^{\mathrm{Block}}$ amplitude, the decrease of LAGB proportion and the increase of dislocation density further reduce the fatigue resistance. In addition to dislocation motion, the α’-martensite phase transformation induced by ratcheting-fatigue has been further demonstrated as a mechanism for coordinated deformation. The percentage of stresses (within one block) that exceeds the diverge critical stress (375.6 MPa) of stacking faults (SFs) determines the α’-martensite nucleation mechanism.