Experimental assessment of using phase change materials in vapor compression refrigeration systems for condenser pre-cooling.

The primary objective of this investigation is to empirically assess a new vapor compression cycle while employing phase change material (PCM) energy storage. During off-peak periods, the PCM undergoes charging, and during on-peak hours, it is discharged to cool the refrigerant entering the condenser, thereby enhancing the condenser's overall performance. In contrast to previous studies that exclusively examined the charging or discharging processes of air conditioning (AC) units, this research delves into the entire 24-h charge and discharge cycle. The proposed system is subjected to testing under identical conditions, both without PCM (conventional mode) and with a PCM storage tank, throughout a 24-h period. The PCM storage tank, which utilizes water as its phase change medium, possesses a volume of approximately 300 L and starts at an initial temperature of 25 °C. The outcomes of the study demonstrate notable improvements when incorporating the PCM storage tank. Specifically, the daily coefficient of performance (COP) increases by approximately 7 %, rising from 2.17 to 2.33. Additionally, it leads to a reduction in both the daily available cooling load and daily compressor energy consumption, with decreases of approximately 3.7 % (from 58.4 to 56.2 kWh) and 10.3 % (from 26.9 to 24.1 kWh), respectively.