纠缠态玻璃聚合物间室温互扩散自键现象的统计研究

IF 2.2 4区 化学 Q3 CHEMISTRY, PHYSICAL Colloid and Polymer Science Pub Date : 2024-10-22 DOI:10.1007/s00396-024-05338-8
Yuri M. Boiko
{"title":"纠缠态玻璃聚合物间室温互扩散自键现象的统计研究","authors":"Yuri M. Boiko","doi":"10.1007/s00396-024-05338-8","DOIUrl":null,"url":null,"abstract":"<div><p>A comprehensive statistical analysis of the distributions of the adhesion strength (<i>σ</i>) developed during a long-term contact (up to 2 months) of two identical specimens of an amorphous entangled polymer at a very low temperature (<i>T</i>) of 24 °C with respect to the bulk glass transition temperature (<i>T</i><sub>g</sub>), below <i>T</i><sub>g</sub> by 80 °C, was carried out. For this purpose, two representative glassy polymers, polystyrene [PS; three PSs differing markedly in the number-average molecular weight (<i>M</i><sub>n</sub>) from 75 to 966 kg/mol] and poly(methyl methacrylate) (PMMA; <i>M</i><sub>n</sub> = 43.5 kg/mol), were selected. Keeping in contact the two specimens of PS or PMMA at <i>T</i> = 24 °C resulted in self-bonding at PS–PS and PMMA–PMMA interfaces. The as-self-bonded interfaces were shear fractured in tension to measure their <i>σ</i> values. The four <i>σ</i> distribution sets obtained for such a low <i>T</i> for the first time were examined using a number of common formal tests for normality and graphical statistical methods, including Weibull’s model. In general, the <i>σ</i> distributions for the PS with the highest <i>M</i><sub>n</sub> = 966 kg/mol were described more correctly than those for the other three polymers, regardless of the statistical methods applied. These results were compared with those obtained after self-bonding at a significantly higher <i>T</i> = <i>T</i><sub>g</sub> − 33 °C for the same polymers. The statistical parameters estimated at markedly different temperatures (<i>T</i> = <i>T</i><sub>g</sub> − 80 °C and<i> T</i><sub>g</sub> − 33 °C) were compared and discussed.</p><h3>Graphical abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":520,"journal":{"name":"Colloid and Polymer Science","volume":"303 1","pages":"129 - 145"},"PeriodicalIF":2.2000,"publicationDate":"2024-10-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00396-024-05338-8.pdf","citationCount":"0","resultStr":"{\"title\":\"Phenomenon of room temperature interdiffusion self-bonding between entangled glassy polymers: a statistical study\",\"authors\":\"Yuri M. Boiko\",\"doi\":\"10.1007/s00396-024-05338-8\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>A comprehensive statistical analysis of the distributions of the adhesion strength (<i>σ</i>) developed during a long-term contact (up to 2 months) of two identical specimens of an amorphous entangled polymer at a very low temperature (<i>T</i>) of 24 °C with respect to the bulk glass transition temperature (<i>T</i><sub>g</sub>), below <i>T</i><sub>g</sub> by 80 °C, was carried out. For this purpose, two representative glassy polymers, polystyrene [PS; three PSs differing markedly in the number-average molecular weight (<i>M</i><sub>n</sub>) from 75 to 966 kg/mol] and poly(methyl methacrylate) (PMMA; <i>M</i><sub>n</sub> = 43.5 kg/mol), were selected. Keeping in contact the two specimens of PS or PMMA at <i>T</i> = 24 °C resulted in self-bonding at PS–PS and PMMA–PMMA interfaces. The as-self-bonded interfaces were shear fractured in tension to measure their <i>σ</i> values. The four <i>σ</i> distribution sets obtained for such a low <i>T</i> for the first time were examined using a number of common formal tests for normality and graphical statistical methods, including Weibull’s model. In general, the <i>σ</i> distributions for the PS with the highest <i>M</i><sub>n</sub> = 966 kg/mol were described more correctly than those for the other three polymers, regardless of the statistical methods applied. These results were compared with those obtained after self-bonding at a significantly higher <i>T</i> = <i>T</i><sub>g</sub> − 33 °C for the same polymers. The statistical parameters estimated at markedly different temperatures (<i>T</i> = <i>T</i><sub>g</sub> − 80 °C and<i> T</i><sub>g</sub> − 33 °C) were compared and discussed.</p><h3>Graphical abstract</h3>\\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":520,\"journal\":{\"name\":\"Colloid and Polymer Science\",\"volume\":\"303 1\",\"pages\":\"129 - 145\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-10-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s00396-024-05338-8.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Colloid and Polymer Science\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s00396-024-05338-8\",\"RegionNum\":4,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Colloid and Polymer Science","FirstCategoryId":"92","ListUrlMain":"https://link.springer.com/article/10.1007/s00396-024-05338-8","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

摘要

在24℃的极低温度(T)下,两个相同的非晶态纠缠聚合物样品在长时间接触(长达2个月)过程中形成的粘附强度(σ)与体玻璃化转变温度(Tg)的分布进行了全面的统计分析,Tg比Tg低80℃。为此,有两种具有代表性的玻璃聚合物:聚苯乙烯[PS;3种聚甲基丙烯酸甲酯(PMMA)的数-平均分子量(Mn)在75 ~ 966 kg/mol之间差异显著;Mn = 43.5 kg/mol)。在T = 24°C时,PS或PMMA两种试样保持接触,PS - PS和PMMA - PMMA界面出现自键。自结合界面在拉伸作用下剪切断裂,测量其σ值。在如此低的T下首次得到的4个σ分布集,使用了一些常见的正态性检验和图形统计方法,包括威布尔模型,进行了检验。总的来说,无论采用何种统计方法,最高Mn = 966 kg/mol的PS的σ分布都比其他三种聚合物的σ分布描述得更准确。这些结果与相同聚合物在T = Tg - 33°C下自键后得到的结果进行了比较。对不同温度(T = Tg - 80°C和Tg - 33°C)下的统计参数进行了比较和讨论。图形抽象
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Phenomenon of room temperature interdiffusion self-bonding between entangled glassy polymers: a statistical study

A comprehensive statistical analysis of the distributions of the adhesion strength (σ) developed during a long-term contact (up to 2 months) of two identical specimens of an amorphous entangled polymer at a very low temperature (T) of 24 °C with respect to the bulk glass transition temperature (Tg), below Tg by 80 °C, was carried out. For this purpose, two representative glassy polymers, polystyrene [PS; three PSs differing markedly in the number-average molecular weight (Mn) from 75 to 966 kg/mol] and poly(methyl methacrylate) (PMMA; Mn = 43.5 kg/mol), were selected. Keeping in contact the two specimens of PS or PMMA at T = 24 °C resulted in self-bonding at PS–PS and PMMA–PMMA interfaces. The as-self-bonded interfaces were shear fractured in tension to measure their σ values. The four σ distribution sets obtained for such a low T for the first time were examined using a number of common formal tests for normality and graphical statistical methods, including Weibull’s model. In general, the σ distributions for the PS with the highest Mn = 966 kg/mol were described more correctly than those for the other three polymers, regardless of the statistical methods applied. These results were compared with those obtained after self-bonding at a significantly higher T = Tg − 33 °C for the same polymers. The statistical parameters estimated at markedly different temperatures (T = Tg − 80 °C and Tg − 33 °C) were compared and discussed.

Graphical abstract

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Colloid and Polymer Science
Colloid and Polymer Science 化学-高分子科学
CiteScore
4.60
自引率
4.20%
发文量
111
审稿时长
2.2 months
期刊介绍: Colloid and Polymer Science - a leading international journal of longstanding tradition - is devoted to colloid and polymer science and its interdisciplinary interactions. As such, it responds to a demand which has lost none of its actuality as revealed in the trends of contemporary materials science.
期刊最新文献
Investigation of the polymer additive on the lyotropic lamellar phase formed by surfactants with different head groups Synthesis of dual-responsive carboxymethyl cellulose–based nanogels for drug delivery applications Research progress on eco-friendly rubber release agents Crab shell chitosan infusion: optimizing epoxy-polyamide composites membrane for improved mechanical and thermal properties Development and evaluation of folate-gelatin-poloxamer P407 copolymer nanogels for enhanced co-delivery of paclitaxel and curcumin in breast cancer therapy
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1