Saeed Khajooie, Garri Gaus, Timo Seemann, Benedikt Ahrens, Tian Hua, Ralf Littke
{"title":"利用压力衰减技术探索饱和水储层岩石的有效扩散系数:对地下储氢的启示","authors":"Saeed Khajooie, Garri Gaus, Timo Seemann, Benedikt Ahrens, Tian Hua, Ralf Littke","doi":"10.1007/s11242-024-02148-y","DOIUrl":null,"url":null,"abstract":"<div><p>The assessment of gas diffusion in water-saturated rocks is essential for quantifying gas loss and determining the amount of gas that could trigger abiotic and biotic processes, potentially altering fluid and rock properties. Additionally, estimating diffusion coefficients is critical for evaluating the balance between hydrogen generation and dissipation in radioactive waste repositories. This investigation involved experimental determination of diffusion coefficients for various gases both in water and in water-saturated Bentheim, Oberkirchner, Grey Weser, and Red Weser sandstones. Experimental conditions included pressures ranging from 0.2 to 1.0 MPa, consistently maintained at a temperature of 35 °C. The diffusion coefficients of hydrogen, helium, and methane in water were determined to be 6.7·10<sup>–9</sup>, 9.6·10<sup>–9</sup>, and 2.8·10<sup>–9</sup> m<sup>2</sup>/s, respectively, consistent with literature values obtained through gas concentration measurements without pressure gradients. However, the diffusivity of carbon dioxide and argon in water was measured at 10.9·10<sup>–9</sup> and 44.6·10<sup>–9</sup> m<sup>2</sup>/s, significantly exceeding their corresponding literature values by an order of magnitude. This discrepancy is attributed to the significant solubility of these gases in water, resulting in density-driven convection as the primary transport mechanism. Furthermore, the effective diffusion coefficients for hydrogen within the analyzed rock specimens varied from 0.8·10<sup>–9</sup> to 2.9·10<sup>–9</sup> m<sup>2</sup>/s, which are higher than those for methane and carbon dioxide, both ranging from 0.3·10<sup>–9</sup> to 0.9·10<sup>–9</sup> m<sup>2</sup>/s. This yielded diffusive tortuosity values ranging from 2.6 to 8.2. The observed effective diffusivity values were positively correlated with porosity, permeability, and mean pore size, while exhibiting a negative correlation with tortuosity. Given that the gas–liquid mass transfer coefficient is directly proportional to the effective gas diffusivity in water, the determined values for H<sub>2</sub> are essential for studying the impact of pore characteristics on microbial activity.</p></div>","PeriodicalId":804,"journal":{"name":"Transport in Porous Media","volume":"152 2","pages":""},"PeriodicalIF":2.7000,"publicationDate":"2025-01-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11242-024-02148-y.pdf","citationCount":"0","resultStr":"{\"title\":\"Exploring Effective Diffusion Coefficients in Water-Saturated Reservoir Rocks via the Pressure Decay Technique: Implications for Underground Hydrogen Storage\",\"authors\":\"Saeed Khajooie, Garri Gaus, Timo Seemann, Benedikt Ahrens, Tian Hua, Ralf Littke\",\"doi\":\"10.1007/s11242-024-02148-y\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The assessment of gas diffusion in water-saturated rocks is essential for quantifying gas loss and determining the amount of gas that could trigger abiotic and biotic processes, potentially altering fluid and rock properties. Additionally, estimating diffusion coefficients is critical for evaluating the balance between hydrogen generation and dissipation in radioactive waste repositories. This investigation involved experimental determination of diffusion coefficients for various gases both in water and in water-saturated Bentheim, Oberkirchner, Grey Weser, and Red Weser sandstones. Experimental conditions included pressures ranging from 0.2 to 1.0 MPa, consistently maintained at a temperature of 35 °C. The diffusion coefficients of hydrogen, helium, and methane in water were determined to be 6.7·10<sup>–9</sup>, 9.6·10<sup>–9</sup>, and 2.8·10<sup>–9</sup> m<sup>2</sup>/s, respectively, consistent with literature values obtained through gas concentration measurements without pressure gradients. However, the diffusivity of carbon dioxide and argon in water was measured at 10.9·10<sup>–9</sup> and 44.6·10<sup>–9</sup> m<sup>2</sup>/s, significantly exceeding their corresponding literature values by an order of magnitude. This discrepancy is attributed to the significant solubility of these gases in water, resulting in density-driven convection as the primary transport mechanism. Furthermore, the effective diffusion coefficients for hydrogen within the analyzed rock specimens varied from 0.8·10<sup>–9</sup> to 2.9·10<sup>–9</sup> m<sup>2</sup>/s, which are higher than those for methane and carbon dioxide, both ranging from 0.3·10<sup>–9</sup> to 0.9·10<sup>–9</sup> m<sup>2</sup>/s. This yielded diffusive tortuosity values ranging from 2.6 to 8.2. The observed effective diffusivity values were positively correlated with porosity, permeability, and mean pore size, while exhibiting a negative correlation with tortuosity. Given that the gas–liquid mass transfer coefficient is directly proportional to the effective gas diffusivity in water, the determined values for H<sub>2</sub> are essential for studying the impact of pore characteristics on microbial activity.</p></div>\",\"PeriodicalId\":804,\"journal\":{\"name\":\"Transport in Porous Media\",\"volume\":\"152 2\",\"pages\":\"\"},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2025-01-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s11242-024-02148-y.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Transport in Porous Media\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11242-024-02148-y\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Transport in Porous Media","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11242-024-02148-y","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Exploring Effective Diffusion Coefficients in Water-Saturated Reservoir Rocks via the Pressure Decay Technique: Implications for Underground Hydrogen Storage
The assessment of gas diffusion in water-saturated rocks is essential for quantifying gas loss and determining the amount of gas that could trigger abiotic and biotic processes, potentially altering fluid and rock properties. Additionally, estimating diffusion coefficients is critical for evaluating the balance between hydrogen generation and dissipation in radioactive waste repositories. This investigation involved experimental determination of diffusion coefficients for various gases both in water and in water-saturated Bentheim, Oberkirchner, Grey Weser, and Red Weser sandstones. Experimental conditions included pressures ranging from 0.2 to 1.0 MPa, consistently maintained at a temperature of 35 °C. The diffusion coefficients of hydrogen, helium, and methane in water were determined to be 6.7·10–9, 9.6·10–9, and 2.8·10–9 m2/s, respectively, consistent with literature values obtained through gas concentration measurements without pressure gradients. However, the diffusivity of carbon dioxide and argon in water was measured at 10.9·10–9 and 44.6·10–9 m2/s, significantly exceeding their corresponding literature values by an order of magnitude. This discrepancy is attributed to the significant solubility of these gases in water, resulting in density-driven convection as the primary transport mechanism. Furthermore, the effective diffusion coefficients for hydrogen within the analyzed rock specimens varied from 0.8·10–9 to 2.9·10–9 m2/s, which are higher than those for methane and carbon dioxide, both ranging from 0.3·10–9 to 0.9·10–9 m2/s. This yielded diffusive tortuosity values ranging from 2.6 to 8.2. The observed effective diffusivity values were positively correlated with porosity, permeability, and mean pore size, while exhibiting a negative correlation with tortuosity. Given that the gas–liquid mass transfer coefficient is directly proportional to the effective gas diffusivity in water, the determined values for H2 are essential for studying the impact of pore characteristics on microbial activity.
期刊介绍:
-Publishes original research on physical, chemical, and biological aspects of transport in porous media-
Papers on porous media research may originate in various areas of physics, chemistry, biology, natural or materials science, and engineering (chemical, civil, agricultural, petroleum, environmental, electrical, and mechanical engineering)-
Emphasizes theory, (numerical) modelling, laboratory work, and non-routine applications-
Publishes work of a fundamental nature, of interest to a wide readership, that provides novel insight into porous media processes-
Expanded in 2007 from 12 to 15 issues per year.
Transport in Porous Media publishes original research on physical and chemical aspects of transport phenomena in rigid and deformable porous media. These phenomena, occurring in single and multiphase flow in porous domains, can be governed by extensive quantities such as mass of a fluid phase, mass of component of a phase, momentum, or energy. Moreover, porous medium deformations can be induced by the transport phenomena, by chemical and electro-chemical activities such as swelling, or by external loading through forces and displacements. These porous media phenomena may be studied by researchers from various areas of physics, chemistry, biology, natural or materials science, and engineering (chemical, civil, agricultural, petroleum, environmental, electrical, and mechanical engineering).