利用芯片细胞穹顶系统开发人脑半球形三维模型和B细胞淋巴瘤。

IF 3.7 3区 医学 Q2 ENGINEERING, BIOMEDICAL Bioengineering Pub Date : 2024-12-23 DOI:10.3390/bioengineering11121303
Ryotaro Kazama, Rina Ishikawa, Shinji Sakai
{"title":"利用芯片细胞穹顶系统开发人脑半球形三维模型和B细胞淋巴瘤。","authors":"Ryotaro Kazama, Rina Ishikawa, Shinji Sakai","doi":"10.3390/bioengineering11121303","DOIUrl":null,"url":null,"abstract":"<p><p>Lymphocytes are generally non-adherent. This makes it challenging to fabricate three-dimensional (3D) structures mimicking the three-dimensional lymphoma microenvironment in vivo. This study presents the fabrication of a hemispherical 3D lymphoma model using the on-chip Cell Dome system with a hemispherical cavity (1 mm in diameter and almost 300 µm in height). Both the human brain lymphoma cell line (TK) and human B cell lymphoma cell line (KML-1) proliferated and filled the cavities. Hypoxic regions were observed in the center of the hemispherical structures. CD19 expression did not change in either cell line, while CD20 expression was slightly upregulated in TK cells and downregulated in KML-1 cells cultured in the Cell Dome compared to those cultured in two-dimensional (2D) flasks. In addition, both TK and KML-1 cells in the hemispherical structures exhibited higher resistance to doxorubicin than those in 2D flasks. These results demonstrate the effectiveness of the on-chip Cell Dome for fabricating 3D lymphoma models and provide valuable insights into the study of lymphoma behavior and the development of new drugs for lymphoma treatment.</p>","PeriodicalId":8874,"journal":{"name":"Bioengineering","volume":"11 12","pages":""},"PeriodicalIF":3.7000,"publicationDate":"2024-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11727638/pdf/","citationCount":"0","resultStr":"{\"title\":\"Development of Hemispherical 3D Models of Human Brain and B Cell Lymphomas Using On-Chip Cell Dome System.\",\"authors\":\"Ryotaro Kazama, Rina Ishikawa, Shinji Sakai\",\"doi\":\"10.3390/bioengineering11121303\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Lymphocytes are generally non-adherent. This makes it challenging to fabricate three-dimensional (3D) structures mimicking the three-dimensional lymphoma microenvironment in vivo. This study presents the fabrication of a hemispherical 3D lymphoma model using the on-chip Cell Dome system with a hemispherical cavity (1 mm in diameter and almost 300 µm in height). Both the human brain lymphoma cell line (TK) and human B cell lymphoma cell line (KML-1) proliferated and filled the cavities. Hypoxic regions were observed in the center of the hemispherical structures. CD19 expression did not change in either cell line, while CD20 expression was slightly upregulated in TK cells and downregulated in KML-1 cells cultured in the Cell Dome compared to those cultured in two-dimensional (2D) flasks. In addition, both TK and KML-1 cells in the hemispherical structures exhibited higher resistance to doxorubicin than those in 2D flasks. These results demonstrate the effectiveness of the on-chip Cell Dome for fabricating 3D lymphoma models and provide valuable insights into the study of lymphoma behavior and the development of new drugs for lymphoma treatment.</p>\",\"PeriodicalId\":8874,\"journal\":{\"name\":\"Bioengineering\",\"volume\":\"11 12\",\"pages\":\"\"},\"PeriodicalIF\":3.7000,\"publicationDate\":\"2024-12-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11727638/pdf/\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Bioengineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3390/bioengineering11121303\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, BIOMEDICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bioengineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3390/bioengineering11121303","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, BIOMEDICAL","Score":null,"Total":0}
引用次数: 0

摘要

淋巴细胞一般不粘附。这使得制造模拟体内三维淋巴瘤微环境的三维(3D)结构具有挑战性。本研究采用片上Cell Dome系统制作了一个半球形三维淋巴瘤模型,该系统具有一个半球形腔(直径1mm,高度近300 μ m)。人脑淋巴瘤细胞系(TK)和人B细胞淋巴瘤细胞系(KML-1)均增殖并充满空腔。在半球结构中心可见缺氧区。CD19的表达在两种细胞系中都没有变化,而CD20的表达在TK细胞中略有上调,而在细胞穹中培养的KML-1细胞中与在二维(2D)烧瓶中培养的细胞相比,CD20的表达在细胞穹中略有下调。此外,半球形结构中的TK和KML-1细胞对阿霉素的抗性均高于二维结构中的细胞。这些结果证明了片上Cell Dome在制造3D淋巴瘤模型方面的有效性,并为淋巴瘤行为的研究和淋巴瘤治疗新药的开发提供了有价值的见解。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

摘要图片

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Development of Hemispherical 3D Models of Human Brain and B Cell Lymphomas Using On-Chip Cell Dome System.

Lymphocytes are generally non-adherent. This makes it challenging to fabricate three-dimensional (3D) structures mimicking the three-dimensional lymphoma microenvironment in vivo. This study presents the fabrication of a hemispherical 3D lymphoma model using the on-chip Cell Dome system with a hemispherical cavity (1 mm in diameter and almost 300 µm in height). Both the human brain lymphoma cell line (TK) and human B cell lymphoma cell line (KML-1) proliferated and filled the cavities. Hypoxic regions were observed in the center of the hemispherical structures. CD19 expression did not change in either cell line, while CD20 expression was slightly upregulated in TK cells and downregulated in KML-1 cells cultured in the Cell Dome compared to those cultured in two-dimensional (2D) flasks. In addition, both TK and KML-1 cells in the hemispherical structures exhibited higher resistance to doxorubicin than those in 2D flasks. These results demonstrate the effectiveness of the on-chip Cell Dome for fabricating 3D lymphoma models and provide valuable insights into the study of lymphoma behavior and the development of new drugs for lymphoma treatment.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Bioengineering
Bioengineering Chemical Engineering-Bioengineering
CiteScore
4.00
自引率
8.70%
发文量
661
期刊介绍: Aims Bioengineering (ISSN 2306-5354) provides an advanced forum for the science and technology of bioengineering. It publishes original research papers, comprehensive reviews, communications and case reports. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. All aspects of bioengineering are welcomed from theoretical concepts to education and applications. There is no restriction on the length of the papers. The full experimental details must be provided so that the results can be reproduced. There are, in addition, four key features of this Journal: ● We are introducing a new concept in scientific and technical publications “The Translational Case Report in Bioengineering”. It is a descriptive explanatory analysis of a transformative or translational event. Understanding that the goal of bioengineering scholarship is to advance towards a transformative or clinical solution to an identified transformative/clinical need, the translational case report is used to explore causation in order to find underlying principles that may guide other similar transformative/translational undertakings. ● Manuscripts regarding research proposals and research ideas will be particularly welcomed. ● Electronic files and software regarding the full details of the calculation and experimental procedure, if unable to be published in a normal way, can be deposited as supplementary material. ● We also accept manuscripts communicating to a broader audience with regard to research projects financed with public funds. Scope ● Bionics and biological cybernetics: implantology; bio–abio interfaces ● Bioelectronics: wearable electronics; implantable electronics; “more than Moore” electronics; bioelectronics devices ● Bioprocess and biosystems engineering and applications: bioprocess design; biocatalysis; bioseparation and bioreactors; bioinformatics; bioenergy; etc. ● Biomolecular, cellular and tissue engineering and applications: tissue engineering; chromosome engineering; embryo engineering; cellular, molecular and synthetic biology; metabolic engineering; bio-nanotechnology; micro/nano technologies; genetic engineering; transgenic technology ● Biomedical engineering and applications: biomechatronics; biomedical electronics; biomechanics; biomaterials; biomimetics; biomedical diagnostics; biomedical therapy; biomedical devices; sensors and circuits; biomedical imaging and medical information systems; implants and regenerative medicine; neurotechnology; clinical engineering; rehabilitation engineering ● Biochemical engineering and applications: metabolic pathway engineering; modeling and simulation ● Translational bioengineering
期刊最新文献
An IoT-Enabled Modular 3D Bioreactor for Vascular Tissue Engineering: Design, Fabrication, and Biological Validation. Artifact-Aware Fungal Detection in Dermatophytosis: A Transformer-Based Approach for KOH Microscopy. GF-Predictability for Dental Implants (GF-PreDImp): A Multidomain Predictive Model for Dental Implant Success-Development, Structure and Clinical Application (Project Report). ARTEMIS: An Explainable AI Framework for Multi-Class COVID-19 Diagnosis with a Newly Curated Dataset. Bioengineered Silver Nanoparticles: Next-Generation Biogenic Synthesis Strategies for Precision Biomedical Applications.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1